The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support Rix Racing

short route intercooler piping

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

WTF, ok you have a intercooler....big deal. Where are the inlet/outlet facing? Pics would help even more. The cheapest way is to make your own, buy some piping off ebay, and make your own. Use a lot of coupler or mark and cut them and bring them somewhere to be tig welded.
 
I agree with the other guys. Get a set of universal pipes off ebay and modify them to fit.
 
You're going to have to custom make your piping, I highly doubt that somebody has a piping kit for an intercooler that they didn't make, intercooler cores come in so many different shapes and sizes that it would be impossible to just make a "front mount intercooler short route piping kit"
 
I bought the universal kit. then I just cut one of the pipes to make it fit. all you need is a separate piece for your BOV and make sure its flanged

Hey whats up dude another New england guy thats good. And yea if anything just buy the ebay kit and custom fit the pipes.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top