BW S362 Twin Scroll

redtsi252 · Aug 22, 2008

Ok...now we all kno how Bad ass the New BW ETT turbos are....I currently have a PTE 6152....with p trim exhaust wheel which flows 68 lbs/min

I am currently running 25psi and see full boost right before 5K....it slowly spools till about 12psi....then BAM 25psi....pulls like a mofo...

I wanted to switch to the JH racing Twin scroll T4 mani....and was wondering how fast I would spool 25psi on a Borg Warner S362 T-4 Twin Scroll .83 A/R

redtsi252 · Aug 22, 2008

anyone?

dsm-onster · Aug 22, 2008

It will be faster. Research how a twin scroll turbo works. You have thr right idea by buying a divided runner manifold.

BigSorn · Aug 22, 2008

how does a twin scroll work?

is it just the divided exhaust?

SpeedAddict62 · Aug 22, 2008

A twin scroll works by separating exhaust pulses. Cylinders 1 and 4 use one side, while 2 and 3 use the other (creating equal spacing of the pulses, the firing order being 1-3-4-2). To properly use a twin scroll turbine housing, you must use a divided manifold. I wish I had a better understanding of turbocharger theory, but I believe the basic idea is to get quicker spool by keeping exhaust velocity up while still allowing enough flow for top end power.

this_tsi_8urV8 · Aug 22, 2008

BullsEye offers a twin scroll s362? Since when?

redtsi252 · Aug 22, 2008

Total Performance and Service: Borg-Warner Turbos Price List

its the 11th from the bottom

redtsi252 · Aug 22, 2008

Anyone have any ideas when I would spool 25psi with a twin scroll t4 BW362 set up?....I wish they had a smaller housing than .83 a/r

I wish they had a twin scroll .63 a/r

IPT · Aug 22, 2008

Just get it in the T3 .85 or .76 housing. They flow more than enough for the S362 and it will help big time on the spool. There are some hondas running around on the .85 T3 divided housings with S366s and are making over 690whp. There is also a SRT4 with an S362 t3 .85 a/r twin scroll that makes 680whp.

redtsi252 · Aug 22, 2008

all I want to kno is will a Divided t4 .83 a/r Spool faster than a T3 .85 or .76 housing

90laserRSfwd · Aug 22, 2008

redtsi252 said:
all I want to kno is will a Divided t4 .83 a/r Spool faster than a T3 .85 or .76 housing

theoretically NO... in the real world, possible.

laserspeeddemon · Aug 23, 2008

90laserRSfwd said:
theoretically NO... in the real world, possible.

Thats the best answer you are going to get until you try it. I will tend towards no. A T4 will not spool faster then a T3, even with a divided housing.

redtsi252 · Aug 23, 2008

hhhmmm...i wonder if they can make me a twin scroll t3 housing????....I assum that would be better

90laserRSfwd · Aug 23, 2008

redtsi252 said:
hhhmmm...i wonder if they can make me a twin scroll t3 housing????....I assum that would be better

True but it would choke the upper end of the turbo. What are you looking to accomplish here? I mean, more specifically, what are your HP or 1/4 goals?

Supa Dexta · Aug 23, 2008

I've got the .83 div t4 362. Not sure when I'll have an answer for you though.. This thing keeps dragging on.. I hope to start tuning next week though.

redtsi252 · Aug 23, 2008

I am FWD....and I have a fully built 2.0...my goals are 500hp on pump has and 10.80's with slicks

Savage Talon · Aug 23, 2008

redtsi252 said:
hhhmmm...i wonder if they can make me a twin scroll t3 housing????....I assum that would be better

They do make T3 twin scroll housings, in 3 diffrent ratios for a 362. The .76 is your best bet. I see 20+ psi by 4k on my bolt on housing 362et.

ceedawg · Aug 26, 2008

90laserRSfwd said:
True but it would choke the upper end of the turbo.

Well that is why he would have to go with a bigger TS turbine housing on the T3 but perhaps not necessarily on the T4 TS housing on the 2.0L motor.

Steve93Talon · Aug 26, 2008

We're currently finishing up Tort's S362 setup with the .85 divided T3 hotside using the GVAutosport divided manifold. We haven't been able to go WOT yet because we're still on stock pump/injectors temporarily until the twin 255 setup is finished. Just from doing low RPM rolls in 3rd and 4th, I can tell you this thing is ready to make boost real fast. By 4k at part throttle it's already making over 10psi and starting to howl. I can't see 30+psi under 5k being a problem. This is on BC280s and a JMF drag manifold, so I'd imagine a milder setup using the .76 hotside would spool even faster. I'd say the .83 T4 hotside would be too big for this turbo on a 2 liter, it'd be more laggy and wouldn't help up top. The GV manifold is available in div. T3 or T4 with single or twin gates, and they can get you the turbo at a great price as well. I think they've got a sale in the vendor forum right now.

redtsi252 · Aug 26, 2008

....that is so0o sick.....damn I cant wait to switch to this set up

ceedawg · Aug 26, 2008

Steve93Talon said:
We're currently finishing up Tort's S362 setup with the .85 divided T3 hotside using the GVAutosport divided manifold. We haven't been able to go WOT yet because we're still on stock pump/injectors temporarily until the twin 255 setup is finished. Just from doing low RPM rolls in 3rd and 4th, I can tell you this thing is ready to make boost real fast. By 4k at part throttle it's already making over 10psi and starting to howl. I can't see 30+psi under 5k being a problem. This is on BC280s and a JMF drag manifold, so I'd imagine a milder setup using the .76 hotside would spool even faster. I'd say the .83 T4 hotside would be too big for this turbo on a 2 liter, it'd be more laggy and wouldn't help up top. The GV manifold is available in div. T3 or T4 with single or twin gates, and they can get you the turbo at a great price as well. I think they've got a sale in the vendor forum right now.

Getting there I see. Fantastic as I'm dying to hear commentary on the mani there Steve. Looks damn good. :thumb:

Supa Dexta · Aug 26, 2008

I just fried my fuel pumps on the first trip out of the garage in a yr yesterday.. So waiting for the new ones to get here. Felt great to have the car out though, until it died on the busiest road in the city. :tease:

rhamlinii · Aug 27, 2008

Steve93Talon said:
We're currently finishing up Tort's S362 setup with the .85 divided T3 hotside using the GVAutosport divided manifold. We haven't been able to go WOT yet because we're still on stock pump/injectors temporarily until the twin 255 setup is finished. Just from doing low RPM rolls in 3rd and 4th, I can tell you this thing is ready to make boost real fast. By 4k at part throttle it's already making over 10psi and starting to howl. I can't see 30+psi under 5k being a problem. This is on BC280s and a JMF drag manifold, so I'd imagine a milder setup using the .76 hotside would spool even faster. I'd say the .83 T4 hotside would be too big for this turbo on a 2 liter, it'd be more laggy and wouldn't help up top. The GV manifold is available in div. T3 or T4 with single or twin gates, and they can get you the turbo at a great price as well. I think they've got a sale in the vendor forum right now.

Glad to hear Tort is still alive. I'm kind of sad to hear, he's no longer with the 20g after all these years. I know he'll finally make it into the 10's and maybe a bit lower with that setup.

redtsi252 · Aug 29, 2008

That set up is so0o damn sexy....so0o when do you think I will spool 25psi?

The Top DSM Community on the Web

BW S362 Twin Scroll

redtsi252

redtsi252

dsm-onster

BigSorn

SpeedAddict62

this_tsi_8urV8

redtsi252

redtsi252

IPT

redtsi252

90laserRSfwd

laserspeeddemon

redtsi252

90laserRSfwd

Supa Dexta

redtsi252

Savage Talon

ceedawg

Steve93Talon

Attachments

redtsi252

ceedawg

Supa Dexta

rhamlinii

redtsi252

Similar threads

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds