1992GSX
15+ Year Contributor
- 146
- 1
- Nov 14, 2006
-
West Valley,
Utah
Ok, so I just got my car up and running after replacing the motor in it when the old one threw a rod. The car runs fine for the most part, but i'm having a few problems and cant seem to figure out what they are.
If I push the clutch in as I'm decelerating, and the engine is at over 2k. The car will die. If i keep it in gear as im slowing the car down, and wait for the rpm's to get to like 1200 or 1500, and then push the clutch in, it'll drop down to like 500 sometime as low as 200 and then pick itself back up to idle at 750-800.
Im so lost at what this could be. I did a lot of forum searching and the closest thread I came up with was this
http://www.dsmtuners.com/forums/problem-diagnosis/43291-rpm-drop-car-dies.html
minus the hissing sound he mentions that his car was doing. The thread died before the reason to the problem was posted.
Any help would be greatly appreciated. Thanks.
If I push the clutch in as I'm decelerating, and the engine is at over 2k. The car will die. If i keep it in gear as im slowing the car down, and wait for the rpm's to get to like 1200 or 1500, and then push the clutch in, it'll drop down to like 500 sometime as low as 200 and then pick itself back up to idle at 750-800.
Im so lost at what this could be. I did a lot of forum searching and the closest thread I came up with was this
http://www.dsmtuners.com/forums/problem-diagnosis/43291-rpm-drop-car-dies.html
minus the hissing sound he mentions that his car was doing. The thread died before the reason to the problem was posted.
Any help would be greatly appreciated. Thanks.