The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support STM Tuned

420A Wisesco vs. JE pistons

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

IMO thats like a pepsi or coke question...and like dave chapelle said I'll just go with the one that paid me last.....everyone else can chime in now
 
I don't get piston slap with wiseco's but i did with je's. je's sounded like a diesel on a cold start. Also wiseco's skirt is coated so it should wear less. Other than that they're pretty much the same.
 
+1 you cant go wrong on either pistons, i own Wiescos and my friend owns JE i think there both good pistons, ive seen his go through 2 piston slaps when his timing belt jumped 2 times and he still has the same JE pistons in the car going like a champ.

Of course he has stock valves is what saved his pistons from crumbling.
 
i have Wiescos and they are great . Yet the questin that should be asked is what compression are you planing 8.1 ,12.1 i have 8.1 and they came coated:)
 
what compression would you guys recommend?
 
i plan on using it for daily driving but also the occasional race. not a hard core race car
 
I went thru 2 sets of JE's and melted switched over to wiseco and not had a problem, the melted pistons was probably due o my inexperience of tuning and not the piston brands, but just thought I let you know
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top