Junkyard. Pull those things anytime a car is there and keep a stock pile for you and you're buddies.

My local NAPA has been able to get things like that for me. I would start there.

Or you can go to your local parts store. They have a small assortment you can choose from. You might also be able to find some at (Lowe's or Home Depot), not for shure though..

ditto on napa

Heres some of the clips you're looking for.

Clips and Fasteners

Thanks fellas. Think I'll check the junkyard and see if they have any that are salvageable.

Be careful about junkyards. Some have minimum prices like $20 for a part no matter how small.

I don't know what junk yard you go to, but I would never pay for something like that. Thats what pockets are for.

SlickGSX said:

Heres some of the clips you're looking for.

Clips and Fasteners

Click to expand...

Talk about a rip off. $17 for 10 of them, and I thought NAPA had high prices on them.

Just go to napa and get them. They will normally have a nice selection in store or they will let you look at their catalog to order them from.

bigun283 said:

Be careful about junkyards. Some have minimum prices like $20 for a part no matter how small.

Click to expand...

Hah, I'd never pay that.

As far as the clips go, you can more than likely get them at Advance. Go to the HELP! section of the store.

JNZtuning has all of the OEM clips. But they are also for close to OEM prices . I ordered 20 of the ground effects clips, 5 of the screw hole plugs for the ground effects, and 20 of the metal interior panel clips. Cost me about $50 but they are exact OEM replacement and were shipped pretty fast.

Interior Trim JNZ Tuning

jnz is a great place to get them if you want to have exact oem replacements. other than that i know napa deff has some that you can get or they will order them for. they have a fast turn around with that kind of stuff too.

There's a place by my house that sells automotive painting supplies, but they also have an amazing selection of clips/fasteners and they're pretty cheap. You might look around and see if there's anything similar in your area.

My vote is for the junkyard. I have a nice little collection of clips and screws started, half of which I have used already.