rsprime1
15+ Year Contributor
- 45
- 0
- Apr 23, 2005
-
houston,
Texas
OK here the deal to make a long story short i just did a auto to manuel swap and droped in a motor on my 96 GSX everything went smoothly.....fired it up and drove it started up fine no check engine light at all idle was good ect. so i took it for a test drive let me explain what the problem is maybe some of you guys can shed some light on this problem..?
Lets say for example im going 45MPH and then i press on the brake the car will stop fine no puls or anything UNTILL!!!! i get to aroung 10-5 MPH the brake pedal starts to pluse HARD!! so hard that the car clunks through out the whole car you can here it bang........bang........bang........ like somthing is loose,but i have checked numorus time i have bled the brakes and have replaced the disc(oh by the way its only on the driver side this happens) and still have that banging noise ,so this only happens when i get to LOW speed only when my foot is on the brake pedale i can stop the car w/ the E-brake and nothing cluncks just when i use the brake pedal
I did eveything that i had to do that was included in the auto to 5speed swap such as the inner axle change that is diff from auto to manuel thats the only thing i can think about that would have anything to do conected around that afected area i have never had this problem w/ any of my DSM's and hopefully someone can help
Lets say for example im going 45MPH and then i press on the brake the car will stop fine no puls or anything UNTILL!!!! i get to aroung 10-5 MPH the brake pedal starts to pluse HARD!! so hard that the car clunks through out the whole car you can here it bang........bang........bang........ like somthing is loose,but i have checked numorus time i have bled the brakes and have replaced the disc(oh by the way its only on the driver side this happens) and still have that banging noise ,so this only happens when i get to LOW speed only when my foot is on the brake pedale i can stop the car w/ the E-brake and nothing cluncks just when i use the brake pedal
I did eveything that i had to do that was included in the auto to 5speed swap such as the inner axle change that is diff from auto to manuel thats the only thing i can think about that would have anything to do conected around that afected area i have never had this problem w/ any of my DSM's and hopefully someone can help