The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Rix Racing

Looking for DES MOINES DSMers

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Status
Not open for further replies.
I wish i was there, but its all good. A little traveling or road trip won't hurt. Let me know too guys, even thou i'm the way in minnesota, i don't mind driving to the meet. Plus i don't know if you guys heard but there a spring cruise up here. It's this weekend Apirl 12 to 13th. It's from Maplewood,MN to Lacross, WI. Its a good two to three hours drive. Theres about 35 people going on the cruise. But let me know also ok. Thanks
 
I wish i was there, but its all good. A little traveling or road trip won't hurt. Let me know too guys, even thou i'm the way in minnesota, i don't mind driving to the meet. Plus i don't know if you guys heard but there a spring cruise up here. It's this weekend Apirl 12 to 13th. It's from Maplewood,MN to Lacross, WI. Its a good two to three hours drive. Theres about 35 people going on the cruise. But let me know also ok. Thanks

Kind of short notice, but sounds good. Are you going to go to our meet here for sure or are you still considering?
(just wanting to know if I need to put you on the list)

:dsm::talon::laser:
 
Count me in, if its somewhere in June. Keep me update and pm me info. So i can also let people up here know about it also. Thanks
 
Alright. We'll try to keep you updated by PMs, but if we get as many people as we're hoping for it'll be almost impossible. Make sure to subscribe to this thread and check on it now and again. As of now it'll be Friday June 13th at an old Sonic on SE 14th St. in Des Moines, IA. If we get too many people to where that location won't work then we'll have to move the date to the day after June 14th and I know a parking garage that we could get into for free and all park on the top level or too.
If you keep checking this thread you'll be updated.

-Zach :talon:
 
im down as long as...
-lack of dbags
-lack of ricers
-car runs ;)
-involves something fun. Just to throw ideas out there.. perhaps a cruise, bbq, friendly competition of some sort that is not considered "illegal" (street racing). For instance, dsm car show w/ 3 or 4 dif classes obviously varying depending on how many ppl attend. Prizes are always fun to, but of course, someone would have to fund this..good luck with that. ROFL

I've always been a big fan of the Saylorville lake area for nice summer cruises and cherry glen/sandpiper/or oak grove "beaches" have massive parking if lots of ppl show. Perhaps? Just an idea. I235 also is a good crusing road as well although very heavily patrolled by the DMI's finest as of late. I dont know whatever that's all i got..i'll keep checkin back, but a set scheduale (sp?) or agenda would help me decide for sure. :rocks:
 
A cruise is for sure. Depending on where we do it BBQ can be done.
As for prizes...we're just starting this meet up. If there are enough people and this becomes a regular meet, which is what we're hoping, then we can get funding later to support things like that.

And there shouldn't be any ricers...Atleast I'm hoping their aren't :toobad:

And if we want to get a park like your suggesting GsXtacY325 then we'd have to reserve it which also usually requires funding.
 
Now I am not sure what you consider rice, but I think of myself more along the lines of a show car in the progress. I have a body kit, CF hood, rims (black not chrome) I don't try to make my car more than it is. Yes I have those damn altezza lights, but I like the look on my car. I hate the huge wing and 3 inch muffler unless it serves a performance purpose. Performance mods will follow shorty after I finish up the interior due to these cars liking to break when you start screwing with the engine. Hope my non-performanced based car is alright with you guys.
 
I would love to go guys but I work Friday nights hope you guys have a great time, maybe next time.

With this big of a notice you still wouldn't be able to get off work to attend?
 
I'm not one to judge when it comes to the ricer stuff, but I definately don't agree with the guys who are the "Fast and the Furious Wanna Be" types. To me a dollar spent on a performance mod always beats a dollar spent on a cosmetic mod, but all people are invited to go without judgement.

Thanks,
Zach
 
Now I am not sure what you consider rice, but I think of myself more along the lines of a show car in the progress. I have a body kit, CF hood, rims (black not chrome) I don't try to make my car more than it is. Yes I have those damn altezza lights, but I like the look on my car. I hate the huge wing and 3 inch muffler unless it serves a performance purpose. Performance mods will follow shorty after I finish up the interior due to these cars liking to break when you start screwing with the engine. Hope my non-performanced based car is alright with you guys.

To me, rice is an attitude, not a style of a car. A ricer talks shit, brags, and actually knows little to none (and usually PAYS to build there car that way :tease:). There is a major difference between a ricer and poor or aggressive styling. Although there are some "tricked out whips" out there that make me think...WTF ?

Just because the car is not performance oriented does not mean that the car lacks good style or that the owner has his/her shit together and can hold or listen to a social automotive conversation/discussion without unneeded ignorance and gloating.

Me ----->:beatentodeath:<-----Ricer
 
Yea, Thats why you go JDM everything...hahaha. JDM is the BEST. The look and the power. But yea its true, i rather do performance than looks, but remember look are good also. Just don't leave your car all rusty and stuff. I like the stock look of a 1g. Just throw on some nice wheel and drop your car with springs, not those cheap ebay coilover.
 
It would have worked if I had any vacation days left, I used it all up going home to South Africa for a month, a few weeks ago. And I would have to take two days bc I also work Saturdays. Count me in if my office burns down between now and then! It would have worked better on a Saturday then I can take a half day instead of two full days.
 
It would have worked if I had any vacation days left, I used it all up going home to South Africa for a month, a few weeks ago. And I would have to take two days bc I also work Saturdays. Count me in if my office burns down between now and then! It would have worked better on a Saturday then I can take a half day instead of two full days.

If several people plan on going we'll have to switch it to Saturday to get into a bigger place for free, since it wouldn't be free Friday.
 
GsXtacY325 has a good idea of what a ricer is...I'd agree with your definition.

And personally if it's anything I spend on looks then it's got to still look stock. To me the best ride...is a sleeper.
Plus if anyone's a shit talker at a DSM meet like this then they need a life. This is a hobby...not something to bi*** about.
 
Yea, Thats why you go JDM everything...hahaha. JDM is the BEST. The look and the power. But yea its true, i rather do performance than looks, but remember look are good also. Just don't leave your car all rusty and stuff. I like the stock look of a 1g. Just throw on some nice wheel and drop your car with springs, not those cheap ebay coilover.

You do drive a DSM that is built, manufactured, assembled in Normal Illinois correct? WTF That would be USDM mad tyte yo :rolleyes:
 
Yea the body is but the motor I got was imported from japan. Came with the evo3 turbo also, but i sold it. I should of kept the turbo tho.
 
i think of it as buying a car and throwing on stuff as follows:
"fart can" u know just the typical muffler tip that sounds retarted
lowering it to where u cant see under the damn thing
putting a wing on it so big that there are not any cars on this planet that need that much down force
tinting the windows so dark that u cant even see out
spray painting racing stripes, with lines so crooked that it wouldnt impress a preschool teacher
a huge ####ing APC eyebrow
stickers all over the car of products that arent even made for the ride

LOL sorry if i affended anybody
 
Hey short notice, really short notice, but im going to be on the loop this saturday if the weather isnt bad. no snow or rain and ill be there. if either of them happen i wont. if there are anybody in the area that wanna meet up lemme know
 
I'm thinking the weather isn't warm enough yet for anybody to really be down there. Give it another month and that place will be packed. I rolled down there all last year, made quiet a few friends just cruising around talking to people.
 
I work at the Downtown Des Moines Marriott. People are already out on the loop. If I can get my AWD put back together then I'll head down there this weekend if the weather's good. Just give me a call my number's posted down below.

:talon::thumb:
 
I got the pm. I may stop out for a bit, I no longer have a DSM, I sold my 99 GSX a couple of months ago, but wouldn't mind coming out. May stick out like a sore thumb in my 03 G35 coupe, but will still be fun to see what DSM's are around now that the old school DSM guys in Des Moines are all basically gone.
 
Sounds good. Thanks for the invite. I'll be going. Hope my car will be running by then (new engine and stuff). (I'm detecting a theme here)

Jeff
 
I got the pm. I may stop out for a bit, I no longer have a DSM, I sold my 99 GSX a couple of months ago, but wouldn't mind coming out. May stick out like a sore thumb in my 03 G35 coupe, but will still be fun to see what DSM's are around now that the old school DSM guys in Des Moines are all basically gone.

Bring your buddies too and hey nothing wrong wit a G35 they're pretty badass.
 
Status
Not open for further replies.
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top