sorry but bump

Can you get a pic of the broken part?

no my usb port is broke on my computer or it would already be up sorry guys

anyone ever relocated there alt to the back if so let me know what i need and how to do it

6 bolt dreams said:

anyone ever relocated there alt to the back if so let me know what i need and how to do it

Click to expand...

Jay Racing Alternator relocation kit - 1G DSM [ARK1] - $125.00 : Jay Racing

cool thanks so who has tried this and how hard is it to install??

What a the benefits to the relocation of the alt. to the rear?

What a the benefits to the relocation of the alt. to the rear?

Click to expand...

Its done to make room for big turbo and wastegate setups, you will have to ditch the AC compressor as well.

It's also done to get the alternator out of all the heat that is up there.

The advantages of relocating the alternator is to get it away from the damn heat source in our cars, the turbo!

And moves a small amount of weight rearwards...by another small amount.

in my case its just cause i broke the mount in the front

Update

I figured out how to solve the problem. It was actually pretty simple
Step one clean both surfaces of the broken mount with carb cleaner.
Step two on the alt itself if your holding it how it should be put on the car, the left side ear has a metal bushing or some thing like of that nature tap it out until it is flush with the inside of the ear.
Step three apply j b weld or what ever you chose to use to the rough broken surface hold in the right position until it sets long enough to hold itself. Wait at least half the recommended curing time.
*note make sure that you run the long bolt through the hole several times cleaning the j b weld or what ever you chose off each time or it will suck later trust me i figured this out the hard way
Step four once the curing time has passed simply re install the alt and your done