The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support STM Tuned

Body Issue -- My Cars Been Attacked!!

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

yellowkyd278

15+ Year Contributor
124
0
Sep 28, 2004
Los Angeles, California
My car was attacked by another car while it was parked in the parking lot. I polished out all the scuffs and scud right away. Not sure how many people have experience with body work but anyone able to throw some estimates on what it would cost to fix? You can't see it in the photos but its also indented a little so the panel will need to be hammered out. :(

You must be logged in to view this image or video.


You must be logged in to view this image or video.


You must be logged in to view this image or video.


Thanks. If you could break down the prices into "hammering out" and "paint stuff" I'd appreciate it.
 
Around here it'll run you $1000 - $1500. Probably easier to claim it under insurance and pay the deductible. Not sure how it is in LA but here a Comp. claim doesn't go against your record so the price won't increase.
 
I dont know what it would cost but I can tell you relatively what needs to be done. The paint needs to be grinded off so they can pull the dent with a dent puller...it welds a piece of metal to the dent in various places which allows them to use a pull hammer to literally PULL the dent out. Theyll then grind off the metal pieces they used to pull the dent, fill with bondo, prime, paint, clear. Thats what we do to fix dents in motorcycle tanks at the custom chopper shop I work at. Not that hard of a process. Personally, I dont think it would be more than a few hundred bucks, if that.
 
I dont know what it would cost but I can tell you relatively what needs to be done. The paint needs to be grinded off so they can pull the dent with a dent puller...it welds a piece of metal to the dent in various places which allows them to use a pull hammer to literally PULL the dent out. Theyll then grind off the metal pieces they used to pull the dent, fill with bondo, prime, paint, clear. Thats what we do to fix dents in motorcycle tanks at the custom chopper shop I work at. Not that hard of a process. Personally, I dont think it would be more than a few hundred bucks, if that.

That whole passenger quarter panel needs to be painted that will cost a few hundred right there. I'd say anywhere from 500 to 1k. Ttake some shots from further away and post them, the camera is pratically humping the car in these pics.
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top