Quicksilvergsx
15+ Year Contributor
- 34
- 0
- Feb 1, 2006
-
Cedar Falls,
Iowa
I possibly bent some valves yesterday after my crank sproket slid almost off the crank, so I took off my head to check it out.
I found no signs of the valves hitting the pistons. I also backed the cams off of each cylinder and filled the dome up with parts cleaner to check if they sealed correctly. All 4 sealed fine with no leaks.
Should I be concerned about anything else being wrong?
Any suggestions on other ways to check would be very helpful.
I found no signs of the valves hitting the pistons. I also backed the cams off of each cylinder and filled the dome up with parts cleaner to check if they sealed correctly. All 4 sealed fine with no leaks.
Should I be concerned about anything else being wrong?
Any suggestions on other ways to check would be very helpful.