The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support ExtremePSI

2g Fuel rail on a 1g?

This site may earn a commission from merchant
affiliate links, including eBay, Amazon, and others.

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

RED&BlackGSX

15+ Year Contributor
53
0
Mar 24, 2004
oklahoma city, Oklahoma
ok, im having FPR overrun with my 255 holley pump. It idles fine, would a 2g fuel rail and regulator fit a 1g?. Im thinking it will. I can get 2g fuel rails and regulators all over the place. and Yes ,I have already thought of a AFP-R, but that gives away the sleeper look. and YES, my fuel pump is probably a lil biggger than I need, but it was cheap and new, and works. any suggestions would be awsome
 
A 2g fuel rail/regulator does fit on a 1g, just installed one on a 1g the other day.

But it honestly would be more effective to get an adjustable fpr..

Matt
 
Ok..Thanks for the reply,so I assume the 2g FPR won't bolt up to a 1g rail?. Thats my main focus, if the 2g FPR will fit the 1g rail, there is no need to by a 2g rail. whats the diff?, 2g and 1g rails
 
I've put a 2g FPR on a 1g rail, but only because it was needed to make a quick fix

to get this to work you would need to slot the bolt holes, and if i remember correctly, it barely worked that way, again, it was only because we needed to get a car running fast that we even did it, I'd advise against it

Matt
 
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned

Latest posts

Build Thread Updates

Vendor Updates

Latest Classifieds

Back
Top