I am finishing up my custom intercooler pipes and am looking for someone who makes j pipes that actually extend to 2.5" at the bottom and not only to 2" like most. I will be using 2.5" piping and this would accomodate it better. I have a 2.5" section from a friend's set up (Nissan) that I am going to cut off and weld to the 2" j pipe. However, to save the hassel, I would rather sell my 2" j pipe and buy one that is already ready for 2.5" pipe. Thanks for the help.

ill take a peak around for ya. why dont you just use a sylicone coupler reducer to run from the 2 inch to the 2.5 peice. just a though

ill try to find j pipe for ya though

Dejontool.com makes one that expands to 2.25''. you should be able to get a clamp on it using a peice of straight 2.5 inch. You could probably give them a call and ask for them to bump it up to 2.5''. Good luck.

Mike

I believe adfx does might wanna try them.
Tyler

In JR's kit his J-pipe expands to 2.5", you might wanna E-mail him and see if he would sell you one .

Go to an exhaust shop and get them to stretch it. May do it for free or nearly free.

In JR's kit his J-pipe expands to 2.5"

Click to expand...

What or who is JR? Thanks.

do a search for JR FMIC

goto autozone, u can get a reducer if you can weld it on. Or have an exhaust shop do it.

RRE's J-pipe is 2.5". But its designed more to the passenger side of the vehicle than most j-pipes.

98TsiAWD said:

RRE's J-pipe is 2.5". But its designed more to the passenger side of the vehicle than most j-pipes.

Click to expand...

The one I have is 2.25"