hay guys,
Im really thinking about getting a spec. stage IV, but i want to do a little research with people who have had first hand expereance with these, i was wondering if you guys could give me some info on the driveablility, and reliablility of theres clutches, now from what i understand the spec clutch dosent come in all one peace like a normal modular clutch setup
if you guys could give me some pointers about install and what not it would really be apreaciated

i guess no one uses spec. round here

We have had great success with Spec products. We use them on our personal cars and our drift competition car. I dont know if i would recommend a IV unless you were going with a massive turbo kit or alot of nitrous. I would probably recommend a Stage 2 to retain descent pedal pressure with strong grabbing power.

I hope this helps a little bit. feel free if you have any other questions.

I've had 2 stage II clutches break at 1200 miles. The spring hub tore apart from the friction disc :thumbdown . Both happened within 100 miles of eachother.

I was really hopeing to get more corrospondence from this that what i have, its hard to make proper assumptshions about theses clutches, because when you get one good coment, right behind it you get a bad one.... and then thats it!!! this is really disipointing
aliczander

In my old Talon I had the Spec Stage II. The first clutch was in for about 4-5K miles. Then after 7-8 track passes the clutch spring broke from it's housing.

Second Stage II clutch was in about 2K miles. Not even any hard driving during that perioud the first time I launched it about 3500 rpms the spring came out again.

This is all my luck with these clutches. I am not going to say that all of them are like that. A friend of mine is running a Stage III or higher as we speak and it has been in there for over 2 years.