Would it be the same if I just ran a wire from the Negative side of the battery all the way back and join them together to the negative wire of the fuel pump. That way it can be grounded direct
I never had to cut any wire while I was installing the fuel pump. It was a direct fit the stock clip was the same as the pump one so I didnt cut anything. :confused:
Ok I have a problem I assume it has to do with fuel or my fuel pump relay not sure heres my problem.1-when I turn on the car it starts up really rough and if I give it gas; it turns off this only happens sometimes not all the time when its cold.2- sometimes my walbro 255 does not do the...
correct :coy: if no many people have this problem what do they do to fix it?today I drove my car and i noticed that its not turning off no more when its warm. But whenever Its cold and i drive off my car turns off. also it smells like hella gas when i first turn it on and white smoke comes out...
I know my timing is dead on but u never know. If i take my car to a shop will they know if my timing is right or wrong?. also what should be the base timing?Im going to plug up all my vacuum lines except the SFMU and the brake booster and see how it runs
Ok well I put another IAC and TPS and the same thing I forgot to mention i have 450cc with sfmu and the feul pressure is at 17 and my wide ban reads 12 at idle but when it warms up its at 14-15 wtf could it be i have no leaks? and i know everything should be running good since it did when i had...
Well here is my problem:ohdamn:
my car turns of when i come to a complete stop or when i let it idle for a while it dies the rpms are about 900 and my vacuum at 11-13 at idle then once in a while when i let it idle the rpms go up to about 1300 then thay drop fast to like 700 and its does that...
well i already know what the torque specs are for my eagle rods. Im still tryng to figure out what the Gap On the Piston RINGS are can anyone help me with that? thanksalso does it matter what way the piston is facing it says JE on the inside of the piston but way should it face towards the...
OK the block is good.somy question know that mechanic is ### and he is leaving town for a month so i am going to take matters in to my own hands.my question is has anyone put other pistons rings other than the je piston rings onto the JE 8:8.1 and .020 over ? what rings do u think i...
The guy is going to come to my pad this friday and check out the block since i didnt take off the block just the head and pistons i told him if he could do a side job for me so ill just have to wait and see what he says when he comes. ill keep u posted. thanks
Ok guys well i took off my head hoping it was a valve or something with the headWTF i was wrong. I took off my pistons and found that piston number 1one it was off i shook it and 2-5 peaces fell of the piston which was the piston rings do to that i took it to a machine shop and told me that the...