As the title states... I'm looking for a set of rods and pistons (85.5mm) for a budget track project I'm building. Brand doesn't really matter but I ideally like something with a higher than stock compression. Looking to buy this week. Must be in good working condition. Thanks in advance.
So I just started the car and checked for voltage at 1 & 6. While running pin 1 was fluctuating up and down real fast like it should because of it firing that coil. Pin 6 just stayed at 14.5v. So does this mean it's an issue with pin 55 of the ecu? How do I test to see if pin 5 on the ptu is...
Everything is stock oem as far as wiring and versions of the parts... all 1990 spec. The coil has been changed 3 times with no effect of the problem and the ptu has been swapped between 2 different (tested good) units. I have done nothing to the noise filter or tach adapter... they are the same...
Just checked the CAS and everything is well within spec. Just for the sake of trying things I checked every fuse I could find and they'e all in proper working order as well. The thing that is really throwing me for a loop is not having battery voltage at pins 1 & 6 of the ptu plug. I would fully...
Excuse my lack of experience in ignition system issues but does this mean I have to spin the CAS in order to get the voltage to show up? If so, I had my wife turn the engine over a few times while I checked for voltage at 1 & 6 and still got nothing. What doesn' make sense to me is that I have...
We both own one lol. His batteries died and he was doing a road call so I left him use mine and he forgot it at his garage. I got his from him last night so I'll just hold it hostage until I get mine back. Being a mechanic his is obviously better than mine.Just got done testing the plug. With...
I own a multimeter but I lent it to my brother several months ago and haven' gotten it back. He has the memory of a goldfish so I guess I'll just have to go get it myself.Just tested the ptu and it checks out fine. Bulb lights up nice and bright. We tried checking voltage at the plug and even...
They are "New" new. Plugs and wires are fine as well. Just changed them about 4 months ago. The car will start and run but it has the classic low idle and obvious stumble from running on two cylinders. Pulling plug wires off 2&3 has absolutely no effect. 1&4 make it nearly die out.
They all looked fine the other day when I hooked my map sensor up. It' done this before and gone away but now it' back. I replaced the coil pack a few months ago because it did this and wouldn't go away. I have brand new coil pack and ptu installed with no change.I should also mention that the...
So Friday I was on my way home from work when I got hit with the Awful 0044 code. Since then I've done the usual swapping of the coil pack and ptu. Even checked the wires and their connections... everything checks out fine. I dont currently have access to a multimeter or anything to do physical...