DSMtuners is a massive archive of DSM information - but more importantly, it's a COMMUNITY! Join in and participate with other DSMers, and invite all of your DSM friends to make this place their home. Chat with others, create a build thread, post questions and answers. Get involved! Logging in will also remove many of the advertisements, along with this notice. ;) It will also allow you to view images in threads.
You are using an out of date browser. It may not display this or other websites correctly. You should upgrade or use an alternative browser.
Fuel lines at the rear of the tank have been completed, had an issue originally with the 90 degree an fittings I was using, switched to a tighter radius 90 and have clearance for days. Had to cut a small section of the truck bed due to the...
Yes it is the NRG short hub + quick release (specifically the 2.5 model). It still boggles my mind people make off the shelf parts that bolt right up to a 32 year old car. The hardest part about putting this new hub on was getting the old one off...
Is that the NRG short hub + quick release ?
Are you happy with the length that it protrudes from the column?
Would you mind posting an overview picture showing that ?
Thanks! Looks like you got that fog light bracket to work !
I DM’d you some time ago as I saw you were close and you shared that! Much appreciated. Considering either them or MadCap Racing which does have a 4G torque plate. I recently found out they do all the work for Carz Performance and are there...
I got the oil cooler system back on the car. Dan and I put this system together back in 2013. Setrab cooler up front, a remote mounted oil filter, and a bypass adapter mounted to a forward facing housing. Pretty trick set-up.I also noticed...
First update in a little over a month, but I've been wrenching my ass off on this mf lol. First post, maintenance:I was beyond-tired of the exhaust leak from the o2/downpipe flange. After going through 3 3 parts stores gaskets and none of them...
Just a few updates since last. I Started by DBW Pedal harness, Kind of. I only Pinned 4 wires to get started. They turned out pretty good considering i dont have the right crimper for this type of pin.After messing with the underside of the...
Picking up where we left off…Broke a piece of the casting on my head off, there was still some decent threads back there so against my liking I decided to send it. Screwed the sert back in and moved forward. It was surprisingly stable...
Thank you. The wheel is a Momo 350mm Tuner wheel with red stitching. I didn't like the "Momo Tuner" logo on the face of the wheel so a bit of rubbing alcohol and a paper towel took care of it.Looks like @TCB91GSX and I have the same 6 ckt...