I had the car tuned at a local performance shop around may of 2020, I will reach out to my tuner and ask him to help, I just don't want to pay for another tune....
Got the timing belt installed with new idler pulley, Tensioner pulley and hydraulic tensioner. here is a log after me firing it up, I adjusted my BISS Screw. I'm waiting on my new Hell Cat 525 pump and Fuel lab FPR, should have them this week, any advise on my log would be great, thanks in advance!
OKay thanks, well i got the car back home now shes JSB untill i finish the timing belt install. I have a new set of FIC 1220 installed so i know the injectors are fine, and you can hear the fuel pump on when you stick your head in the trunk, anything else i should look at before I try and start...
So my car has been acting really funky, i noticed a rattling noise coming from my timing belt side of my engine, so i noticed when i rev the car, my timing belt in-between the intake cam to the idler pulley my belt vibrates and looks wavy, so now im doing all the pulleys and new belt and a new...
I only have my wideband sensor in the O2 housing, i dont have the stock O2 sensor at all its just the Wideband sensor, should i get that O2 sensor and put that in the O2 housing spot and then put my wideband senor in the spot on my downpipe just before it ends??? My mechanic set it up like how i...
I re-calibrated the wideband sensor and the car drives great now. I havent messed with the DSM Link yet, this weekend I will set up the PIN assignments, My O2 sensor is on the O2 housing just after the manifold, I have another spot just before the down pipe ends, would you recommend me switching...
I recently had my Galant VR4 tuned on speed density, installed new FIC 1220's injectors, and installed MTXL Innovate Wideband gauge and a OMNI 4 bar, its tuned on pump gas at the moment (Switching to E85 soon). Now after I get the car warmed up the car seems to drive good, but after about 2...