The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

Recent content by sTeCz|GsT

  1. 2g Logging water temps of 210-217. too hot?

    well i have the same problem i can drive around town for years with my 90 tsi awd t and my temp is fine...i get on the highway and 10 mins later my car starts to over heat idk i dont get it i pressure tested my rad and its fine theres no coolant leak i did a leakdown test head gasket is fine and...
  2. 70 compression across

    ok so i randomly decide to to a compression test of my motor and came to the conclusion that starting from left to right cylinders the compression of each was 70 75 85 and 95. now i know thats kind of low how should i go about this problem?? :confused:
  3. what do i have to do??

    thank you all..and just to get this right i would have to cut the 1st gen intake to match the 2nd gen head,and i should rather go with a 1st gen intake or a 2nd gen?
  4. what do i have to do??

    wait say that again please? lol
  5. Very difficult to start when cold, fine when hot.

    ive been having the same issue, my car doesnt liek to start even its its warm out and my motors cold lol. any ideas?
  6. Still smoking bad

    i also did a leak down test and it also said my valves were holding good but the problem was the valve seals meaning theres oil going into the exhaust manifold.
  7. what do i have to do??

    whats up guys...i have a 90 eclipse gst stock but with little things done like boost gauge exhaust and intake filter. the recent owner rigged the head like he put bigger bolts in it and just ruined the head. so i decided to put a new one on. the head i got came off a 2nd gen 7 bolt and i...
  8. is the motor stressing??

    sorry about the rules and everything. i forgot to say in my post that i have a aftermarket boost gauge and my vac is 20 and i checked to see if i had any boost leak and i don't. 2nd gear at 4 grand turbo is fully spooled and from 4 to redline it sounds like the motor is being pushed harder then...
  9. is the motor stressing??

    like i said i have nothing done to the car. I'm not loosing boost either. and to tell yo the truth it really doesn't matter how i type you understood what i typed so please keep your comments to yourself :nono: OK now I'm boosting 9 pounds and i am not loosing boost. and it doesn't make any...
  10. is the motor stressing??

    ok check it im new to dsms i know my stuff but when it comes to trouble shooting i dont have the experience...i redline 1st gear..beautiful...2nd gear around 4grand turbo is fully spooled and from 4 grand till redline it sounds like im stressing the motor to hell. im boosting 9 pounds cuz i took...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top