The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support ExtremePSI

Recent content by Sirius1995

  1. Sirius1995

    420A Spark plugs are black with white tip

    https://www.dsmtuners.com/threads/help-for-diagnostics.545811/
  2. Sirius1995

    2G Keep popping 20A, Engine fusible link.

    check your ECU for internal damage and obviously all positive side cables and cable ends, make sure battery terminals are not hitting the hood and battery is properly bolted on
  3. Sirius1995

    420A Heavy Smoke and High Idle After Head Gasket Replacement

    Valve stem seals are there to prevent oil from engine head to get in the cylinders, if those leak, oil will get in the cylinders and burn
  4. Sirius1995

    420A Heavy Smoke and High Idle After Head Gasket Replacement

    Yes, I'd start by replacing valve stem seals
  5. Sirius1995

    420A Heavy Smoke and High Idle After Head Gasket Replacement

    Before that, take spark plugs out and show what they look like
  6. Sirius1995

    Resolved No 3rd and 4th gear automatic transmission

    Pressure lines clogged? Maybe measure pressure?
  7. Sirius1995

    2G Fans not working

    yes it has to be running
  8. Sirius1995

    2G Fans not working

    Here's 420a ECT values
  9. Sirius1995

    2G Fans not working

    Also, you can plug up where sensor was with another sensor and put the plugged in sensor in almost boiling water and see if fans kick in
  10. Sirius1995

    2G Fans not working

    So first measure that you'll get ~5V DC to the connector which plugs in to the ECT sensor if yes it's most likely bad sensor but if you wanna check if sensor is bad, you can either back probe terminals when car is running and everything hooked up, in Ambient temperature it should read...
  11. Sirius1995

    2G Fans not working

    You can try if it works with multi meter it's 5V sensor so it varies 0-5V depending on coolant temperature, this is pretty typical part to fail, though couple months sounds too soon but if you do get code for it, it might be bad
  12. Sirius1995

    2G Fans not working

    Start by replacing ECT, if fuse was blown it's because that fuse is not designed for that much of a current flow and resistance so it will increase amperage over what fuse can handle, and I would not put bigger fuse in it as that might cause harness problems
  13. Sirius1995

    420A Car stalling problem

    Sounds like vacuum issue, spray some brake cleaner around intake manifold where it connects to the engine head and the split part and see if idle gets up for a bit, also inspect all vacuum hoses for cracks or cutsIs check engine light on? Are you able to read code?
  14. Sirius1995

    2G Fans not working

    I don't know why they hooked both fans together, that's a lot of current needed and I'd start by checking relays and fuses as they probably poppedAnother fan is for engine cooling and another one is just for ac, there's no need for another fan to blow unless it's hot summer day and you have...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top