The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support ExtremePSI

Recent content by robevo

  1. Street Build Proton Jumbuk Pickup

    So after a 6 month build, we fired it up and gave it a tune through the front wheels (im lucky enough to have a 2wd dyno at my tyre shop). On 19 psi it made 320 at the front wheels through the auto with bugger all timing ans nice and rich on the lambda scale. I corner weighed it in full race...
  2. Street Build Proton Jumbuk Pickup

    The front end is an evo 2 front bar, headlights, bonnet and guards. They all bolt straight up, so it looks like an EVO2 pickup.
  3. Street Build Proton Jumbuk Pickup

    So the combo will be 2.1 alloy rod 4G64 Ported hyundai sonata head with hks valve springs standard hyundai aspirated sonata cams un touched. Hyundai sonata intake and throttle Methanol and no intercooler GTX3076 turbo Mechanical fuel pump Motec M4 Motec dash Forced four shift box A built auto...
  4. Street Build Proton Jumbuk Pickup

    I fitted my old engine in and started to bolt everything up
  5. Street Build Proton Jumbuk Pickup

    Did a 5 stud conversion as they are 4 stud from factory.Fabricated in a 2 link kit and the Tacoma rear diff with matching diff gears to suit the auto (RVR Hyper gear)
  6. Street Build Proton Jumbuk Pickup

    The old 1.5 liter engine was removed along with all other unwanted bits
  7. Street Build Proton Jumbuk Pickup

    While I was waiting for my engine bits arrive for my mirage, I was trying to work out what to do with all the left over engine/turbo bits I have lying around. I came across this yellow 2009 Proton Jumbuck for sale here in Australia. After some negotiations I snapped it up.These Jumbucks share...
  8. POST UP YOUR DRAG RACING VIDEO!

    In car vid of sme passes 10.99 10.7 10.8 best mph 125 using a shift box and paddle shifters off an evo 10
  9. Drag Race Build Mid Engine Mitsubishi Mirage Build

    Thanks heaps. Its slowly getting there. Im making the throttle cable for it now and its back on the dyno for some more tuning.
  10. Drag Race Build Mid Engine Mitsubishi Mirage Build

    My next step is a hi comp bottom end Im in the process of building a 14:1 comp Crower 102mm crank 4G64 bottom end
  11. Drag Race Build Mid Engine Mitsubishi Mirage Build

    Bit of yellow paint and a new pb a few weeks ago I did 4 passes 11.820 @114.68 1.653 60 foot 11.820 @111.93 1.610 60 foot 11.770 @113.62 1.539 60 foot 12.643 @91.78 1.51 60 foot (Missed 2nd gear and 4th I cant drive lol) The shifter bushes were flogged out
  12. New PB 11.770 All Motor mirage

    After sitting around in the shop for a few months I decided to give the mirage a splash of yellow paint and take it out to the track for some fun.Bit of yellow paint and a new pb last night I did 4 passes 11.820 @114.68 1.653 60 foot 11.820 @111.93 1.610 60 foot 11.770 @113.62 1.539 60 foot...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top