Thanks, took some time scratch building it.

The irony. Logged back on today for the first time sine 08, and remember laserspeeddemon

95-99 eclipse and talon parts.Cleaning out the garage, available parts.2 clutches- both in working condition for nvt350 5 sp. 2 doors - both power, good class, mirrors, interior panels 1- 97-98 talon front bumper - very good condition 1- 97-98 talon rear bumper - very good condition 1- 97-98...

Sounds to me like the typical non turbo 3rd times a charm. When your turn your key into the on position does your fuel pump prime, if it does than your getting fuel, its eventually starts and runs so your getting spark. Not the best way of going about it, but it makes sense. You might just...

It doesn't soundlike your going to be needing all that much fiberglass, just go to your local auto parts store and buy a small package of it for 5 or 6 dollars. Package size will run from 8-10 square feet. I would use fiberglass mat for the first 2 layers, followed by three layers of...

A body kit is up to you, but the problem most people run into with them is that they try to do it themselves and they end up looking horrible. If you decide to do it, let a good shop do it and dont just glue it or tape it on. Theres body kits, and than theres the body kits everyone thinks of...

You would have to switch the bellhousing or half case on the neon trans from a cable clutch to a hydraulic clutch. If I remember right dodge switched the neon from a cable clutch to a hydraulic clutch in 2000 or 2001, and those will replace transmissions in the non turbo 95-99 eclipse's and...

Eclipse, 46 miles to work, 36 to my other job, and 43 miles back every day plus parts runs. Does manage 44 mpg on a regular basis.The talon sits in the garage, maybe going 100 feet a year, even thats pushing it. Someday, it will be finished.

I did something like this a few years ago. The front bumper is a piece of cake, but a suggestion is to not use bondo, but use fiberglass matting to mold it in, and bondo only as a fill here and there. Too much bondo and you'll have nothing but problems. To make sanding easier just put a flap...

this sounds familiar, I remember a few of dsm tuners that had this happen to them.If the person accused is in fact the scammer, he deserves everything that he's going to get. Lets just hope someone who didn't read all of it doesn't go straight to his address and do something stupid.

Things like this are shipped by size and weight is not really an issue unless a hundred lbs or more. The issue is space, a 4 foot 15 lb bumper (not accurate) is taking up that much more room where other valuable shipments could be.Look into trucking companies and see if you can piggy back...

Very subtle, looks nice. So he basically rolled the fenders and cut / rewelded the rear support together.

I wouldn't be too concerned about this. If it bothers you, you could always run a reverse phone or reverse email to find out who exactly is doing this. Otherwise, block the email address and move on.

You abused the tranny and threw the differential pin through the case. You need a new half case at the very minimum. This happens quite often, usually when the fluid overheats and the pin seizes from lack of lubrication and ends up going through the case. The nv-t350 tranny is a good trans...

Get your story straight. Do you have an add in a local paper or anything with a printed asking price for the vehicle. Do you have and amount paid for the vehicle. Use this to verify that you did infact drop 800 off the price of the car.Have your last smog record Receipt from dealer when...