The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support Fuel Injector Clinic

Recent content by RiGs2G

  1. RiGs2G

    MOD 2011 5 am departure in the high desert

    Where are your guys pictures? I was in the Evo X that rolled with you.
  2. RiGs2G

    WTB: 2G AWD manual Trans

    I need a transmission for an AWD 2G 5 speed ASAP. If the trans is shot and the case is good, then Ill take it. My case broke where the throw out bearing rides. Thank youMike Call or text 701-340-8391
  3. RiGs2G

    Sunroof Won't Close

    On my car, I have to "help" the passenger side along a little bit to get it to close. There is a little part sticking out that you can push on to help the side go to close. Mine does the same thing, and nothing looks broke. Good luck Mike
  4. RiGs2G

    How's my lip look?

    I think either the ends need to go to the edge of the bumper, or maybe cut them at an angle so it "fades" into the bumper, if you know what I mean?
  5. RiGs2G

    Bumper just says "AWD"

    I removed all of the Eagle and TSi on my rear bumper and left the AWD. I like it.
  6. RiGs2G

    Punishment Racing Tial 38mm MVS Wastegate Install

    I was hoping not to have to pull the turbo again... damn. Its off the O2 housing, so maybe one of these days, Ill pull it off and port it.
  7. RiGs2G

    Punishment Racing Tial 38mm MVS Wastegate Install

    I have the fitting in the top but nothing blocking it
  8. RiGs2G

    Holset Turbos, PART 8

    I got my holset return line off of a cummins forum. I then modified it to fit the way I needed it to. I have a picture in the oil return line thread. Its probably not what you are looking for, but it will give you an idea of what you need to do. If I had access to a welder, I would have made...
  9. RiGs2G

    Punishment Racing Tial 38mm MVS Wastegate Install

    Ok got the car back together. I got a 10psi spring in my wastegate now, and the car is running at 20psi. I took it to a local shop here and he looked at the wastegate and couldnt find anything else wrong with it. At least Im at 20psi now! haha. Im going to try a different boost source (other...
  10. RiGs2G

    Cutting bumper for Cooling, need opinions

    I have the 97 talon front bumper,so myabe ill photoshop the vents before I order them and start cutting.I really like the 97 talon bumper,and would rather not cut it up but I may have to to keep it cool
  11. RiGs2G

    Cutting bumper for Cooling, need opinions

    Thanks!I searched ti tec and got a bunch of bicycle parts.haha
  12. RiGs2G

    Cutting bumper for Cooling, need opinions

    Do you have an ebay link?
  13. RiGs2G

    Holset HX35 questions

    I have been keeping the car healthy.I was just having some boost issues.it was boosting too much,I couldn't get less then 25psi.I have done a few boost leak test and I have none.I'm lucky enough to have a wide range of cars to drive when the talon isn't running th way I want.when having the...
  14. RiGs2G

    Holset HX35 questions

    I havent looked at my IDCs yet. I really havent been getting on it because of all the boost issues I was having. My car is my DD and doesnt like more then 20psi on pump gas. So I run 20psi daily and crank it up to 23 or so on race gas for the track. The flapper was the big issue with the...
  15. RiGs2G

    fans running all the time?

    Alright, I hope this is an OK place to post this. Maybe it can be added to the sticky? I recently got a AC fan that had the plug broken off and got a plug from the cooling fan. I racked my brain trying to figure out how to wire this up! I figured it out after going back and forth between the...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top