7gs primarily came with sohc 4g64 engines. You can swap to a 1g or 2g depending on power goals. Many have just done the head swap with a 2g head and added turbo with supporting mods for added power.More can be found at thegalantcenter.
Issue was with the type of sensor I was using for the tps.
I had to use the one for a 3g eclipse 8gGalamt, etc....Working on another mount for the throttle cable and will test it out afterwards
I was in the same boat as you,
I had to setup a fb to get in contact with him and ended up opening a paypal dispute with him.
I got the product months after I ordered.
I actually got the same item from FFWD before Frontline and it was ordered after I payed Frontline.Good luck, It will more...
I made a new bracket to hold the throttle cable.
I haven't got a chance to start it up yet and check if it revs.Kai,I thought the same thing about the tps. If thats the case I jumped too conclusions and thought the car would not rev because of the wrong reason.
If I start it up and the...
Well Iam happy to say that I've got the car started consistently today.
I had to switch up the Coil on plug solution.
The first setup I had, used two j722t igniters to power Chrysler 300m coils but couldn't get the setup to start consistently and when it did run, it had lots of back fire and...
Will do Luda!I moved on to the Haltech Elite for the ecu and got a successful start.
The car just needs some external pieces finished up like paint windshield etc.can't wait to get roll this thing out of the garage and get some sunlight on it :)
Two years later :)....
Been working on the rx7 but havent been posting. Fb/Insta got more of my attention but think I may move away from that.Anyways here are a few pics of what ive been up too.
Things are moving along....I actually re-made the passenger motor mount because I found a very well made 12an oil drain ss line from ebay user of nascar team that interfered with the original mount i made.Latest list of things working on below
grimspeed 3 port.
extremepsi oil feed line for...
Figured out a trick setup for the power steering since the exhaust manifold placed the turbo to far north making it unable to use original ps pump. I'am using a pump from a volvo s40 plumbed directly into the rx7 rack.. I may add a filter later.. but decided on the volvo pump instead of the mr2...
Bump is there any twinscroll manifolds out there that fit holset hx35 or 40 ?
Iam guessing RedJack, JHracing and Punishment Racing ts manifolds have been discontinued....