Replaced right rear caliper, Added sway bar, LSD Rear diff installed.Driveline refresh, 2 U joints/dog bones and caps replaced. Lobro fill with grease. Filled both carrier bearing bushings one with 3m window and the other with roofing silicone...

Actually decided and had time to work on this talon! Shocking...So over the last 2 weeks i have started to work on the main things and a clean up of parts.AT, the valve body came out as i wanted to install a shiftkit and change the fluids and...

After a Desmodronic learning curve, multiple trips to my favorite Duc shop to borrow some critical tools, lots and lots of measuring, and plenty of sweating the details, my Testatretta is back together and ready for action with upgraded 1098S...

Nothing wrong with that at the wheels for a 420A...and on a stock ecu !

Soooo......I took my sensor out and measured the depth of the hole at 19mm. Sorry it's a bit fuzzy. Hard to do one handed. Then I measured the length of the sensors threads. 11.99mm, so it bottoms out on my sensor body for all to know. There are...

Well how many can show a picture like this. The 1999 Infiniti I30 rolled over to 400000 miles last night. I say that is an accomplishment and shows that maintenance will keep your car going! :cool: :thumb:

I couldn't add the video along with pictures, so here is the old Honda just idling along like she had never sat for 12 years! :cool: By the way, my son repaired the gas sending unit last night and now THE GAS GAUGE WORKS. He really is good at...

New valve stem seals and those pesky oil squirter crush washers care of @DSSA once again

Ok, I found more WAYBACK pictures that I had been looking for. 1971 Camaro SS 350, 2 600 Holleys, Comp Cam, 10:1 with 3:73's. Ran 13.2's in street trim. 1970 Chevelle SS - 350, 4 speed, 4:11's. Never had her to the track. A friend of mine got...

I spray bombed it temporarily and did a tiny amount of bondo as warping happens very easily on such small ga panels

Exactly haha , I enjoyed it but was alot of late-night after work days to Finnish it, por-15 ,and 3m seamsealer used , dissolved rust with acid . Cut out as much as I could and made my own patches, all mig welded . I'd love to actually post all...

Heys guys. Long time ago I was 2point3Tsi but can’t for the life of me remember the email I used😂. Well as bender would say “I’m back baby” and hoping I get my poor 2g back on the road this year. Need some custom piping and few other trinkets and...

I might be crazy, but I’m doing it! A weekend trip from Texas to the Pacific Coast of California in my 1991 GSX. For the preparations leading up to this trip, check out my build thread...

Yeah, I bought a pair a while back. Don’t even know if I need replacement rear axles yet, but I couldn’t pass up a deal like that even if they just sit on the shelf as future back ups.

Been a little while again since I’ve updated. Managing two shops has my free time a bit tied up these days! But I finally got a twin disc clutch for this upcoming race season thanks to my amazing fiancé. Should be getting the clutch and my new...

My 2 cents ...Check the fuel pump

They must be hot at that price ...