Look at Jack's tech youtube again. I don't think you're supposed to be able to push the slave in with ease. I think you move the nut until you can't and then back it off until you have to really muscle it in and then back it off another 1/4 or 1/2 turn. If I remember right, I don't think you...
Well. The problem reared it's ugly head today. The radiator took a dump. It poured coolant out of the bottom. I do however think the water pump needs to be replaced. It's never been replaced that I know of.
Thanks for all the replies.Regards
Greg
Hello to all.
I was driving in a buddies 93 Talon the other day. The htr works pretty good driving around. When we came to a light and the rpm's dropped to around 750, I noticed the air coming from the htr got fairly cold. When we started driving again and the rpm's went back up, the air got...
I bought a downpipe. Took it to a small muffler shop in town. They put the downpipe on and bent a new 3" exhaust all the way back for 224.00 including a Magnaflow muffler.Regards
Greg
Hello to all and Happy Holidays.
I have a problem I can't figure out. Water keeps building up in the driver side taillight assy. I have pulled the light housing out and inspected it for cracks or holes to no avail. All lights seem to be plugged in properly. I empty the housing out, re-install...
Hello to all and Happy Hollidays
Reading about the Innovate All in One wideband AF gauge MTX-L and the Innovate
DB gauge kit, I am not seeing much difference in their functionality. Are they essentially the same, or does one have more features and benefits? It looks to me that the DB kit is...
You don't seem to be too far from normal. I would get that Lucas out of there and go to some good 10w30 oil. 40 wt can get a little fudgy if it is cool out. Thinner oil, especially synthetic will give you better lubrication upon startup which is where the most wear on your motor happens...
Hello to all.
Since the rear diffs in our AWD cars are LSD, should we be using friction modifiers with our differential fluid? My Jimmy is 2WD limited slip and GM wants friction modifiers mixed in the fluid when you change it. Your guidance is appreciated. I currently use RedLine heavy...