God, the engine bay looks so good with fresh paint! How did you prepare the surface for primer/paint?How is the DeVilbiss working out?

FYI before you have someone weld anything to the block, check to see if you will have that hole available between the freeze plugs for cylinder 1 and 2 on the back of the block.I'm not really up on the G4CS details, but I currently have my knock sensor in that hole in my 4G64. There was one...

See what you can do with the center console. The exhasut passes right under there, and in your case, so does the driveshaft. My girlfriend's Audi has quite a bit of the thick wooly foam matting all inside the center console, shifter, and armrest area. Up near the firewall where your pedals...

That adds a few miles for us westerners, but that might work unless there's an easier pull-off spot near the 495/i95s interchange...

The weird thing is, it's the exact same sound from both seats at almost the exact same time (slightly offset from eachother). That makes me think it's mechanical rather than pennies or accumulated and solidified skinflakes.Not as weird as the red Henkels tweezers I found under the seat...

There is a single click coming from the seats in my spyder when I accelerate or decelerate. It is definitely in the hinge area, and it happens to both seats. I can't confirm if it is happening in each hing of each seat, but it is happening to both seats. It sounds like there a single, loose...

I just dropped the hammer on this sucker: DeVilbiss Automotive RefinishingBut I bought it from this place: DEV-802170 DEVILBISS GFG-670 PLUS® Gravity Gun, WITH NO CUP FOR THOSE USING PPS OR DE-KUPS.Which was the absolute cheapest I could find it. I plan on using the DeKups disposables...

No way, I see coal miners and soybean farmers coming to the party..

I would probably catch you guys as you come down around the beltway. I 'spose we'll worry about that later on.Also, when the time approaches, we should see what the game schedule is at that place. If the ball fields get full they might gobble up our parking. It would be cool if they could...

I should be able to make it since classes *should* be over by then. I'm down for joining any cruising party headed south. I do Dulles tool road, to 495, to 95 south.HEADCOUNT: 1. DSMking90 2. 2-3 friends 3. sik4g63 (permitting my car is on the road), burgers 4. Nytescion 5...

Did anyone consider Mach V? They have a big-ass parking lot, right across from VIP supposedly. I went there during summer and they were having a barbeque/show kind of thing. I'm sure they'd love having a bunch of reliable DSMs in their parking lot just asking for parts...

Something is not right electrically. Is everything plugged back into the ECU properly?The car absolutely will not come close to running right with the airflow circuit like that. Gotta fix that first.

I had terrible luck trying to learn how to MIG weld aluminum. In fact, I never actually was able to. My dad bought a MIG welder to use with all the stainless scrap and mild steel he had, and I didn't realize you need 100% argon for MIG welding aluminum. I was just assuming the argon/CO2 mix...