I'm running the foam piece and that should not affect fitment. Something else is stopping you. Either the bumper isn't trimmed enough or something else aftermarket is in the way or bent as stated above.

Thanks! I'll definitely grab you some dimensions and some better close up pictures.

I've been working on cleaning up my engine bay lately and I knew the old yellowed stock coolant overflow tank had to go. Unfortunately new oem ones are discontinued.While searching for a new oem 2g tank, to no avail, I ended up stumbling upon the evo 8/9 oem overflow tank. I had no idea if...

Any word on if you guys are getting more of the 2g foil hood heat shields back in?

Also what mph should be the minimum 4th gear will happen? Mine will go into 4th at 20mph if I'm real easy on the throttle.

My torque converter will lock up in 3rd gear if I'm not on the throttle enough and then shift into 4th. In 4th it will lock up below 30 mph. I've replaced the tps and properly adjusted it. Also replaced the vss and tcu. What else controls lockup and what mph should it happen at? Should it ever...

Might as well. We sprayed the lock mechanism with it too. I really didn't think it would fix it, but something was definitly gummed up because it worked great after.

No problem. I had to open my passenger door and reach over and pop the drivers side interior door open for years and it sucks. I gave up on it until my buddy offered to help. Both doors on my eclipse are good now. Still need to tackle the drivers side door on my talon. You may not even need to...

Your saying you have to pull the handle most of the way up before it pops the door open? And it barely is able to? I've had that issue for years where it wouldn't open the door at all and a friend of mine finally figured it out. He took the white plastic cover plate inside the door off and...

No problem. The more handles you break, the easier it gets.

That should do the trick.

The closed end of a normal wrench works great there. And I have big hands lol.

Along with the exhaust manifold heat shield that was already mentioned, grab yourself a battery tie down bracket too.

Even the small nipple on the injen intake is uncapped. :ohdamn: