Oil leak on valve cover so it leaked down. This was the prior picture before I cleaned the area with the old sensor.I'm changing it because I have a crank and no start. Got fuel, spark, compression, timing. When I start the car, my rpm isn't moving.
I haven't taken off the belt because I was...
I have the same problem as you. I am assuming you don't have a wideband.
Your car is running rich and its choking on to much fuel.
With my problem I have to turn on power to the car BUT not start the car. Wait for my wideband to read error then I can drive the car somewhat normal but car still...
You're saying you can't read from ecu, see if you have your files in the right place. check the red circle I did. Sorry if i said hex or xml files. i meant HEX files
Btw. I have a thread I started with a similar problem. I don't know how to navigate this new layout. Haven't been much on here since it changed. Check for my ecu flash thread. Might help you out
Sorry guys. I'm not on my laptop. I'll chime in later. Brother in law borrowed laptop for his finals.
I ran into the same problem when I first started flash. Make sure you have the right files saved in the right drives.
and when you want to flash the ecu, make sure you are using the rom files...
Your fans are not coming on so when you drive, the air cools the radiator.
Make sure your coolant hoses are both hot. That will check if your thermostat is opening and closing. If you want the fan on all the time. Take off the connector to the coolant sensor and connect a bobby hair pin or...
I am having the exact same issue. New coolant temp sensor, new thermostat all mitsu products.
Now, I use a paper clip or hair pin, stick it into the coolant sensor female side. It should turn on the fan I guess but mine didn't, I just hear a click. Sounds like it could be a relay.Any...