Does anyone know how many pounds the pressure plate in the stage 4 kit is? I'm a little confused cause stage 1 is 2400, stage 2 is 2400 and stage 3 is 2600 but the correlating number on stage 4 is 1620. Stage 4 says it holds 250% more than stock which is significantly more than stage 3 so I...

I'm converting from a 95 to 97 body. I'm posting a pic of the new headlight wiring and the wiring plug from the old headlights. Can anyone tell me which color wires go together. I greatly appreciate it. Thank you!

Does anyone know what size/thread the bolts are that hold the ECU in place in a 2g? Thanks in advance for any help.

In the past I used a ACT 3600lb pressure plate with a 6 puck disc, then I tried a Clutchmasters 3600lb pressure plate with a 4 puck sprung ceramic disc. I prefered the 4 puck set up. Now I'm thinking of trying an EXEDY stage 3 pressure plate with a 3 puck sprung ceremetallic disc. Does anyone...

Does anyone know where I can find new hatch weather stripping for my 95 gsx?

Does anybody know what adaptor I need to fit the A/C charge port on my 95 GSX? I bought what Knechts told me would fit my car, but it doesn't fit. I then called Mitsubishi and their tech didn't know anything. Any help is appreciated.

Does anyone know where I can get ahold of 97-99 headlight connectors/plugs? I'm swapping from 95 headlights and the plugs are different, I called Mitsubishi and they didn't have any help to offer. I appreciate any help.

Does anyone know the sizes/thread for the following parts:The bolts that mount the engine bay fuse box?All the interior screws?Bolts that mount the ECU?Bolts that bolt down the two backseat pieces?Front drivers side and passenger side seats?

I'm ordering them next month and they are available in different offsets, which offset do I need to make the 245's work? Tirerack recommends a +45 but that's for a 215 wide tire.

I have a 95 GSX. I'm purchasing some 17x8 Enkei Kojin rims does anyone know if I can fit 245 wide tires on the car?

That's why I'm really confused. Everything that I have read didn't say anything about changing the connectors.

I have a 95 eclipse gsx and am swapping the headlights for a 96-99. I know I have change the bumper. My question is does anyone have a how to on how to swap the connectors, cause they are different.

Does anyone have a how to and or a diagram? Thank you!

I have a stock composite headgasket and I just put in ARP head studs, I torqued them to 80 ft. lbs. with moly lube. Is that enough torque? Should I go up to 90 ft. lbs.? My plan is to run 24psi with my 20g.

Can I remove the evap canister and just put a filter/breather on the fuel pump hanger?