Price on just the outlander caliper brackets?

So i finally blew it up testing out a new cam. June 30th 2017 2 rods let go and blew 2 holes in the block and one in the oil pan. Spent the last few months looking for another 4g37 but these things are getting almost impossible to find now, at...

The oem stubby shaft. I have never even considered for a second using cheap parts for this car. Right now I’m considering paying $1000 over new price for a FF oil pump.After talking to a member on here this morning I believe the cause of...

I'm thinking the same thing... lets hope it's not the knockoff with the missing oil groove.

Which stubby shaft?

Here's a list of crossovers that is floating around. There are Timken solutions for MD726235 & MD732314 but MD726236, MD736638 & MD737652 only have the one manufacturer with no crossover known.MD700207 = NSK B25-139C3 MD724118 = NSK R30-10...

Has anyone tried to x reference with another manufacturer. I find it hard to believe that these bearings are manufactured specifically for our platform. I have some good connections for bearings as an industrial mechanic (Milwright). I also do...

Your not the only member asking me this, at this time I am not looking to sell the last outlander brackets separately. however I will check my storage if i have more i will list them on here.

From a restoration perspective, all these discontinuations are upsetting but the appeal of these cars has always been in their modification potential. Imo we can make better parts than mitsu for 95% of the things that are discontinued. When you...

Update: another set sold, 1 set left.

Update: 1 set sold 2 sets left.

some members had reported this issue in the past and I remember reading in one case it was due to a bad proportioning valve, but it could also have be a sticking caliper piston, I would also suggest inspecting the fluid for contamination, you...

For sale: (3) sets available... Update: 2 sets have sold, now 1 set still available.If anyone needs a good used set of 1g dsm 2 piston brake calipers, with the early screw in brake fluid supply line, or wants to upgrade the early 1g dsm 1...

nice this is what I plan to do with mine to keep it stealthy, maybe above the fuel tank to keep it out of sight for smog and it simply looks cleaner.

I have mine in the back by tank but if my return line was stock I would get some barb fittings for that sensor and put it between the fpr and the stock hardline.

I know this post is a bit old, but maybe it will help the next member on here looking for information. I happen to have a set of "90 AWD rear calipers and just scored a set of "91-"94 AWD rear calipers (they came off a 93 Eagle Talon 5 speed AWD...

I decided to follow up on Hiroshi's comment regarding the bleeder screws and CAPS show a change from 10mm to 7mm in the first week of 1992, so there is more going on. I would expect this to force a part number change to the caliper casting.

Found this link recently and wanted to share to the restWww.Charm.liIts a file directory of service manualsScreen shot

Sold.

I have a set of good used rear oem mudflaps for a 2g dsm, i am asking $85 shipped obo all US states and PR, tracking will be provided, paypal goods and services, if you need more pictures let me know.