Thank you for the response and the insight on this issue. I really appreciate it!few questions: in the picture, what would be considered “contact” for the screw on the BOV? Just want to make sure I do this right loland second, I tried teeing a boost source into the BOV from where the boost...
Okay thank you for the insight. I really just don’t have enough knowledge to know the difference lol..It definitely sounds like the BOV, cause it has that chirpy tone, however if I let off throttle at like 2-4 psi, there’s a definite surge sound that doesn’t sound like the BOV. But even if it...
Have a Greddy type-s BOV (came with the car) and I’m trying to get it adjusted to where I don’t have compressor surge, otherwise known as the “STUTUTU” sound when you let off boost (I’m sure you all know this). The BOV seems to do its job when I’m hitting max boost (meaning it’s just one solid...
also (forgot to mention) I did install a new o-ring on compressor side! Infact I almost forgot to put it on. All seals and retaining clips have been reinstalled and turbo hasn’t given me any problems as far as having trouble spooling up at 2500 rpms in 4th and 5th gear
What I mean by wastegate not working, is that the actuator itself seems to fluctuate. Sometimes it opens and then sometimes it won’t open at all which causes high boost which then causes the ECU to hit fuel cut. This only happens From 3rd-5th gear. 1st and second never seem to come close to even...
Gotcha. So far I have no fuel mods... and from what I know, nothing has been done to the car other than the mods listed above.... I should still be running on stock specs...
Hello fellow DSM’ers. I’ve been searching around on DSMTuners but haven’t been able to get a good answer to the problems I’m dealing with.I own a 1997 Eclipse GST with 106k miles on it. It has an aftermarket front mount IC, new greddy BOV and charge piping, and a pair of ram horn headers that...
Hello fellow enthusiasts. Noob here. For some reason I absolutely can NOT find the right transmission mount replacement online for my 97 GST w/manual tranny. I’ve searched everywhere but I can’t find the dang thing. I’ll upload a pic of what the stinking thing looks like. Any idea where to find...
I haven’t done a boost leak test yet... that’s something I need to go ahead and buy (a tester).I’ve taken boost controller off that was installed when I got the car. It’s hooked up to stock wastegate pressure.I’ve noticed that when I first start driving in the morning when it’s cold, it...
2G eclipse GSTI’m experiencing fuel cut at about 11 PSI. Anyway to combat this? Could an aftermarket fuel pressure regulator fix this? I’m sorta stumped on why the ECU is doing this..... any help is appreciated..Thanks
So I have this 97 Eclipse GST that I traded for a while back and as I was trying to track down the bad ground for my OBD2 port, I stumbled across this absolute nightmare tangle of random wires and plugs that have no home..... this is gonna be a shoot in the dark.... but can anybody identify what...