The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support ExtremePSI

Recent content by laynbdyon20s

  1. laynbdyon20s

    LA/OC Getting back into it

    Steve....dont be a jackhole and get your a$$ to the meets....still happenning on Mondays when we first started, a lot of new people, some of the OG's have gone...
  2. laynbdyon20s

    No power to Center Console ie: A/C, defrost, Convertible Top

    I was wondering if the HVAC, defrost, and the conv top share a relay behind the console. I get no power to them, nothing works. The hazards button does work though. The lights work, I get no power to the top, the defrost and the HVAC controls. I checked the fuses, relays under the good and under...
  3. laynbdyon20s

    MOD is going to be Saturday, July 11th, 2009

    We(LADSM) get a decent size cruise going to MOD. Last year we took up almost 2 rows in their Parking lot. We caravaned with about 30+ carsCheck it out:Ladsm.com - View topic - MOD 09
  4. laynbdyon20s

    How fast have you gone on a 20g tdo5h not the bastard 20g !

    I ran a 12.8 @ 109 with my 20G on my full weight spyder.
  5. laynbdyon20s

    GST Vs. GST Spyder Exhaust Difference?

    I have a Spyder and Im running an Apexi 3" catback
  6. laynbdyon20s

    Clutch pedal pressure loss at high RPM's

    I'm using the SS lines.
  7. laynbdyon20s

    Clutch pedal pressure loss at high RPM's

    The throwout bearing is an OEM one, and it has about 8k miles on it. The clutch is adjusted, but I'll recheck again. My pivot ball is not shimmed. I had my tranny rebuilt about 15k miles ago (jack's transmissions, very very very happy!!!!), and I checked the clearances of how far the fork moves...
  8. laynbdyon20s

    Clutch pedal pressure loss at high RPM's

    I replaced the slave, master, and the line. Dont think it's that. If it was a bad slave, I think I would lose pressure all the time, not when I'm high in the RPM's.
  9. laynbdyon20s

    Clutch pedal pressure loss at high RPM's

    When i'm above 6500 RPM's, I feel like my clutch pedal is losing pressure and i have to press it down all the way. It does it in every gear. If I drive it "normal" pedal pressure is fine. Could it be that maybe my pressure plate is flexing?I have an ACT 2600 clutch/pressure plate and a...
  10. laynbdyon20s

    heavy exhaust smell with a spyder

    The only time I smell fumes is after I smash on the car and the external dump is screaming its heart out and I come to a stop. Normal driving, nothing. i have no cat.
  11. laynbdyon20s

    Where are the FWDs at????

    Just ran a 12.8 @ 109 in my spyder. Time to put in the Holset....
  12. laynbdyon20s

    Finally, after 3 years...

    We need that E85 out here in socal!!!!!!!:cry:Great runs!!!There are only 2 gas stations in Southern California that sells E85. There is a 3rd being built in Pomona!!!
  13. laynbdyon20s

    Low Oil Pressure at idle/warm up/driving

    I've searched but I havent really found what could be wrong. I have a 6 bolt in my 2G but machined to accept 7bolt oil filter housing, etc... I didnt have an issue with oil pressure until recently. At idle and start up my oil pressure is at 0-5 pounds(Autometer Guage). When I start driving, it...
  14. laynbdyon20s

    Need help fitting 26.5/8.0X15 tires what backspace on rims !

    I'm using the same tire. I used JEGS RWD rims and a wheel spacer. I forgot the exact size of the spacers. I also use longer wheel studs. And lastly I use spring spacers since my car is pretty damn low.
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top