The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

LaserAWD's latest activity

  • LaserAWD
    That's good information about the button head vs hex head torque. I didn't realize there was a difference and was just going off max torque on Engineering Toolbox for M8 steel coarse thread...
  • LaserAWD
    I hope the install goes well and that it works well in use! I'm kind of interested in it because it seems to me that our oil pumps are not the most reliable part of the engine. And the cantilever effect of the stub shaft type has always seemed...
  • LaserAWD
    One of the big reasons for the oil pump for me was to keep the oil pressure under control, especially at high rpm along with startup. It's been shown that a stock oil pump, even with the relief valve ported, can have crazy high oil pressure on...
  • LaserAWD
    There is definitely room for more head height. I wouldn't want a lock washer digging into the nice billet front cover though, maybe a wave washer? Then again the stock bolts do not have any washers so might not be a need for one. I went with...
    • oil pickup bolts.jpg
  • LaserAWD
    I haven't gotten the engine in the car yet to figure out the actual oil cooler lines but thought I'd post this here to help anyone looking to install the Frontline Fab oil pump. The numbers in the photo are the under head bolt length. All are...
    • FF oil pump bolts.jpg
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top