I'm having trouble deciding what compression piston to go with I like the 8:8:1 because the will prevent knock, but I feel like the car will be sluggish when out of boost, with the 10:5:1 I just feel like that will be to high for turbo I mean stock is only 9:6:1

yes 420a block and dsmlink won't work with this being the 420a, however I will need to add the wideband to my list

stock non turbo injector size is 190cc I beleive, I'm rebuilding on a stock block but I figure it should be good enough for my goals. The foal is about 300whp and somewhere in the 13's for a quarter mile. As for the budget this motor will be built over the course of a year its an extra motor I...

Okay so I finally decided I THINK what I'm going to do. I'm going to slowly start and rebulid the spare motor I have, heres what I've come up with so far please add suggestions1. get machine work done on the block 2. Weisco 8:8:1 forged pistons 3. Eagle rods 4. new water pump and oil...

Once again guys thanks I really appreciate all the feedback1. Selling this car is not an option!!! put way to much money into cosmetics and its my first car 2. I do have a dd 96 grand cherokee so were set there 3. I have an extra 420a block and headWith that being said It's either cams...

Thanks for all the suggestions so far guys. Selling the car is definetely not an option, right now I'm thinking the cams would be the best bet since I would be able to reuse them once I go turbo. Will I see any gains from them with the stock ecu though, thats the real question. Also I have a...

Okay so here is my question I'm going t have about $500 to put into my car, my mods so far areCAI Header Cat back 57mm throttle body crankscraper UDP port and polished head MSD ignitionWhat should I do next with the $500? AFX? Crower stage 2? eventually I wanna turbo though what...

96 grand cherokee

Okay guys thanks very much

Okay so today I discovered that my speedometer is sticking, It sticks at about 75 mph and will stay there till I slow down till about 60mph when it finally gets "unstuck" What could be causing the speedometer to stick?

Does it need to have the 420a though or as long as it's the 2.0

So i need a new power steering pump what other cars can i take the pump from as i will be going to the junkyard tommorrow thanks

So I was at the track tonight and was talking to a kid who had a neon there. He had the 2.0 and the motor was the same except for the head being reversed. It was all stock except for a stock srt-4 trubo and bigger injectors. He ran a 13.0 at 12 psi of boost. Now I know he is pushing the...

I know because I would be interested in something like this

55mm because I heard that 60mm will hurt your low end alot