Thanks for the input. Ive been looking at some fp manifolds or maybe an evo one. The tubular manifold was on the car when I got it, and just had more important things to fix since then. I may pick up a new manifold this weekend. Rotating the compressor housing threw everything out of line, and...
Car is a 91 gsx, was putting on a vrspeed factory front mount on the car. Due to the jpipe hitting the tubular manifold, I had to rotate the compressor housing. My question is, my wastegate isn't lining up like it should, so is there anyway around this, or do I have to get an external wastegate...
would also like to know of someone local, was thinking about doing a remote tune, but having someone local would be great. Im from the Thomasville area also, I drive a blue 1g
had to change my center console, a couple tabs broke off, so my knobs wouldn't stay in, also had to fix the previous owners wiring mess, splicing in a new harness to the fan control, and calibrated my mtx-l wideband. Good day.
Well i was considering that it was a shift fork issue, so i pulled my transmission out, the fork looked great. So i decided to take a look at the clutch. I took the pressure plate off and a spring from the clutch fell out. Come to find out, my clutch fell apart.
I was told the pedal assembly was a possiblity by a friend of mine, but he said that i should pump the pedal with my hand and try to pull it up, if it didnt go past the brake pedal, it was fine, have you heard of this method? Ill guess if its not the pedal, and the fork or ball, the transmission...
The car is a 91 gsx. When i got my car back in febuary, the transmission had a slight grind in 1st and 2nd. It has no got to the point where the car will pull foward when the clutch is pushed in. I put a new slave cylinder in, still does it. The car will also grind when i try to put it in gear...
I have a 1g gsx. When i cold start the car, it idles fine, then once the engine starts to warm up, it will cut off unless you hold the gas pedal down. I put a new iacv on the car, didnt seem to help. Car also has new plugs, and i swapped the injectors out for a known good set. Has anyone had...
Doing a timing belt on the motor for my laser, and noticed that the camshaft notch thingys were not at the top as they should be. So, my question is, to get them to the top to properly get the notches at the top, which way should I rotate each cam to make sure no valves are bent. When i did a...
Any one have any experiance with motion lab as far as dsms go? I'm considering having them tune my 1g. I know they do alot of subarus and EVOs, but am trying to get someone with personal experiance with them that has a dsm. Thanks in advance!
I just bought a motor to put into my 1g. The problem is, the alternator and all the other belt driven componets were not mounted onto the motor. So, My question is does any one have a pic of how all this should be mounted, or a link to a 1g service manual. Ive searched all around fourms and all...