I’ll check the hoses if there bad I’ll get new ones I wanna check if it’s the proportioning valve and reset it bjt I’m not sure if it’s possible I only see them on bigger vehicles or the ones that have the break switch on them

So the thing is my stock ones had broken bleeder valves so I went to the junkyard and got the front two I removed the piston checked if everything was good and it was no tears in the boot piston was good and clean so the calipers are good ima see if I can reset proportioning valve (not sure...

So I have no leaks with the proportion valves no leaks on any of the lines so it may be an internal master cylinder or the break booster but I see no leaks with the break booster and when I was bleeding I saw chunks of black plastic with looked like the seal of some sort also when bleeding the...

I don’t think it fell into the transmission but unsure. I robbed one from the junk yard and it didn’t come with a gear either. I’ll check that out tomorrow. The master cylinder looks new which is why I find it weird that only the passenger side is bleeding correctly but I’ll check all the lines...

So I recently replaced my brakes on my (420a 98 Eclipse RS) and the passenger side bled correctly, no bubbles good pressure, but the driver side is a pain. Sometimes it gets pressure and comes out fluently no air bubbles then randomly I get a burst of nothing but air bubbles for days. I've...

I figured it out thank you for everything shifts so smooth feels faster too😪I wish it was faster

I’m working jt by my self everyones to busy to help me out so it’s just me and a large stick that pushed the clutch down when the clutch is pushed down I open. The bleeder valve close it let go of the clutch and repeat for 30min till no more bubbles came out but that’s the slave cylinder on the...

Recently replaced my clutch master cylinder (98 2g Manual RS) because it was leaking and the gears where getting stuck (still went into gear just had to wiggle it),I was going to replace that adjust the clutch and see if the gears would go in smoothly if they do then good. (my problem is that...

Okay will do thank you do you know where to buy a scanner like that?

Well the check engine light came on for a second then just turned off I plugged In my obd 2 scanner and got nothing and the engine and trans are in good condition just unsure why it does that randomly I’ll check for leaks

So I recently bought a 98rs 2g (420a 5speed) and it’s a pretty beat up car chasies a little bent I recently started driving it to school and back and I noticed that when I put it in first at random times the car starts to aggresivly shake and it turns on the check engine also the breaks just...