Yep, that's the critical area that far too often kills the TCU. The green transistor there is part of the voltage regulator and white hybrid IC on the other side of the cap has the logic to drive it.The yellow sleeved capacitors don't usually...
So I'm working on my 1g finally and ordered new exact OEM capacitors. Has tech come along way since as the OEM one is huge compared to the new one but its rated to the same spec? Check out the pics but its almost 4mm smaller but exactly the same...
We believe the previous repair, whatever that was where the oil pan had to come off, caused a good portion of this. The o-ring is either the feed or the return, the two ports are for the oil filter housing, which runs variable timing and is...
If you don't care to read the entire post, here's a quick summary - pay it forward and help automotive enthusiast culture thrive in the long term by posting all tech related Q&A and automotive related content in automotive forums, INSTEAD OF...
Checked everything front and rear?
You said you replaced everything but haven’t checked the balljoints which come in control arms.
We’re going to need some pics front and rear and possibly a video doing a pull safely.
It could be torque steer but
Have you raised it and checked side/side and up/down play by moving the wheel?
Have you visually inspected the suspension? Balljoints, bushings, control arms.
Rotated tires?
We need a base to start and pics help.
It’s wired incorrectly but I don’t have a diagram that might be right until tomorrow.
You have every red wire going to that plug and that doesn’t seem right.
There’s other wires going to below the headlight itself.
I’m still in the wiring trying to figure out what I do and don’t need to thin the harness. I’m probably going to run the harness from wheel well to wheel well differently to make room for other things.
I also just started cutting to make room...
Took it for the first drive yesterday. Although only a few miles everything went well. No crazy noises and no puddles under it LOL. Today I decided to wash it up and give it a quick detail.