Yep, that's the correct trans. So they're normally in 2WD but then have selectable 4WD hi/lo (using the old school manual shifters of course!). Some of the "premium" models like our Super Exceed also came equipped with an LSD.
Yep, and according to the seller it's only got about 40K miles on it, and they already did a timing belt service before sending it.It's utility for now, but our plan is to build a camper in the back for overlanding. It will eventually replace...
Sounds like you're all set then. I never know how much someone knows that's posting on here so I try to give as much info as possible.Years ago back when I had my first dsm I rebuilt a spare 7 bolt engine I had picked up for my 94 eclipse...
Yep, a band-aid is what I'm looking for mainly to be able to drive it around this summer and fall a bit. Engine rebuild is my long term solution.I've actually got 2 replacement engines that both came out of Delicas. One is a low-mileage 7-bolt...
Just to be clear this may or may not work and if it does work it is more so just a band-aid to the situation and is not a long term fix. Sounds like you understand that but just wanted to clarify.Also not sure where you got the engine from that...
Appreciate all the replies, as this seems much easier than taking the engine apart :D I've used Sea Foam for years on our '82 VW Westfalia and it's always kept it happy.Yes, because we're also doing a camper build and I need it for supply runs...
Run Sea Foam in the oil for an day before you change the oil. It is a cleaner/solvent. Not something to leave in, just something to bust up crud just before an oil change. I do it to my old LS Chevy truck to try and keep the lifters from being...
So you are rebuilding a different engine for the van but are trying to keep the one in the van going in the meantime?If so I would try pulling the plugs on the engine and pour a cleaner like berrymans or seafoam into the cylinders and let it...
HI all, I’ve got a 6-bolt 4G64 engine in my ’91 Delica van that I’m trying to fix up enough to get back on the road. I’m working on rebuilding a replacement engine that’s outside the van, so just trying to understand what kind of work I need to...
@NextLevelDelica Nothing to add here aside from props to a fellow Delica owner! Very impressive what you've been able to accomplish with your 4G64. I'm merely learning to rebuild a stock one, but nice to know there's more potential there (esp...
Hey everyone,
First off, thanks for being here. My name's Ron and I'm in the tuning stages of my highly modified JDM Delica L300 project.This van came with a N/A 4G64 SOHC 8 Valve with 8.5:1 compression, a distributor and a terrible lack of...
This might be the incorrect place to post, But to all in this forum and any other forum i wanted to thank you. As many times as i've felt ignorant toward my mechanical genius, you all helped me. As i read time and time again dsm or not people get...