My stock Evo 3 on my mirage made a Dyno 373whp, and 351wtq iirc.Like 27psi and 93 pump, meth inj on a stock 5 bolt with 272 cams.The same turbo with a 6/5 td05 wheel change from the master, Jusmx141, is now at about 450whp and room to go but I spin a lotttt more 😂
So I just bought the Magnus remote IAC for my 95 DSM harness mirage to try and stop the cold start annoyances or holding the pedal down some until coolant temps is 100°So I just need an EVO 3 bolt IAC and I can plug the sucker in and drill and tap for a 1/4" barb at the TB elbow and the other...
Happy 2024.....60,400mi......Drove an hour to my bros place, trans temp was 140-180 range in town and backroads/hwy. Doing great. Mani is quiet so far.Volts with new alt and battery don't go below 12.8 @ harness, in gear, headlights on. Works for me.Got some DSM belt squeal, need to tension.
We are less now, because of this.Guys, we old now. All of us have gray hair. Take care of yourself and live life to your fullest.I was told he collapsed while pushing his car back to the pits after winning his race......so he was on cloud 9 when he went. So there's that......
OKAY I finally got around to a solution.....I got some grade 8 plated 90mm m10x1.25 bolts and some nice doorman? Flanged nuts, turned em down with a 45° chamfer on the lathe at work to clear the casting angles, and sandwiched the hot side and the Mani together.Car is back together, sounds...
I got the old Mani off......what a sh*t show......3/4 turbine housing bolts were drilled out and semi egged. Ones mostly ok. They used trans and alt bolts with NUTS on them to hold it on :0I'm gonna have to get some nuts and bolts and reassemble somehow to make it work. Down the line I'll...
I have Evo X paddles and they seem the same as this. Once I go auto in the mirage I plan to use these full-time for driving, semi auto paddle mode.I have another DSM, auto 99, and I'm prolly gonna put a set on that as well once I get time to wire it all up. That one will have the TCM switch...
Mani cracked @ #4 runner but I still drive it sometimes. I got in 2 new doorman. Improved OEM cast Manis. I'll machine the turbo side holes to 60mm like I did for my Summit. They work GREAT.I did cross over 60k miles! It is in storage for the winter as well. I bought a house and I'll have a...