Im going to take a shot and this and tell you what i would do. Now, Im only telling you this, cause it is as far as i understand from all the reading i have done, but Im not sure. It more of a question.Looking at the idle log, and tracking the SD VE table you can see where it is pulling...
Doing a BLT as i cant get normal numbers in Link. This is all on a new engine with plenty of new upgrades including Magnus SMIM, used 1G TB, PR FMIC, bov, blah blah that i havent ran before.Anyway... doing a BLT, i hear air flowing in the TB. I really dont think its espaping to the...
I did a 97 Auto FWD to a manual AWD using a 99 Parts car. It is possible. Its honestly only about 2 more hours of work to do the 5 speed swap with the AWD swap. I wouldnt attempt it without a parts car though.No, you're incorrect. You have to cut four 2 inch squares to drop a subframe bolts...
Im not an expert in this as i am really new at doing this. Your running very rich.
First try to get you ISC to a good position (30)... Your aimed idle is at 850 and your steady at 800.then get your Airflowperrev up to around .25 ... Readjust your MAFcomp as its reading to low.. Id 0 it all...
Im also 90% sure in that log i had injector 1 disabled. May i suggest leaving the original skins for link on there as some of them its hard to tell if something is disabled or not by the color.Hmm... didn't notice that. I should be able to see that under the DTC tab in link right? As far as...
all evap stuff that is deleted... Its not checking for them no moreDont even worry about that log... it was barely running and i have fixed the mechanical/electrical issues that caused the crappyness of it.I just want to make sure i am starting on a good platform. Does my NB sim look the...
I was able to get my idle to a smooth 900 by adjusting the BISS and it was what i had changed to have it aim for... but my iac position certainly isnt at 30. I have made a few changes that certainly helped stuff out alot.I had to drop my battery down and low for the SMIM install. I ran a...
Got done spending the day boost leak testing and fixing on my brand new rebuild. Now this has 0 miles. I am also just did an AWD swap and have to run open O2 housing cause I dont have my exhaust to put on. I was wanting to get a good tune/idle before i drive it anywhere, first place being the...