The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Rix Racing
Please Support ExtremePSI

Recent content by greengoblin

  1. greengoblin

    greengoblin's AWD Project

    Cold rolled 16ga .
  2. greengoblin

    greengoblin's AWD Project

    Fire wall design, mock up and cut out. Pencils, markers, cardboard tape measure, laser, nibbler,grinder, cleco clips ,madness and guessing. Good times. I still have more to do.
  3. greengoblin

    greengoblin's AWD Project

    It will have sealed ducting. I went with a pusher to keep the fan away from the exhaust heat and to allow room for a larger turbo down the road.
  4. greengoblin

    greengoblin's AWD Project

    A custom radiator is going to be built for the car and with how tight the packaging is a full mock up one is being built out of wood. It’s cheap, fast to build and allows me to visualize everything. The lower mounts are going to use locating pins on the bottom of the radiator and two brackets...
  5. greengoblin

    greengoblin's AWD Project

    Thanks it’s been a journey. Thanks for following!
  6. greengoblin

    greengoblin's AWD Project

    I plan on getting a few more things from them. They make some really nice oil coolers and they are priced reasonably.
  7. greengoblin

    greengoblin's AWD Project

    Let see it’s been a while. Well I have my drysump tank now. So let sow of some bling pics first. The tank was built by AH Fabrication . They have top notch service and very rapid turn around. I was super impressed with them!
  8. greengoblin

    C1 Motorsports Evo Swap Time Attack Eclipse

    MCA suspension golds if memory serves me.
  9. greengoblin

    1G Downforce! Wing & Splitter!

    I figured you would find there stuff helpful and its easier than my typing it all out. Also you might find somethings at curiosichi.com useful too. https://curiosichi.com/bondage-a-guide-to-bonding-to-carbon-fiber/ It's a new site but some good stuff there.
  10. greengoblin

    1G Downforce! Wing & Splitter!

    I'd square out the trailing edge in front of the front tires adding a splitter end fences and front tire deflectors. The simple sides spats deflector would also double as a air damn. Also add diffuser to the bottom. Professional Awesome makes some so you can look at their site and see what I'm...
  11. greengoblin

    greengoblin's AWD Project

    Lets see. The design and build for the removable radiator and intercooler core support is done. i need to do some clean up and a few things but I'm happy with it. The front diffuser supports where also integrated into rad/IC core support. A receiver hitch style design was used for this. The...
  12. greengoblin

    2G Cooling System Setup

    I plan on testing and adding restriction plates in the lines if needed. Also an in-line tsat is an easy solution Also.
  13. greengoblin

    greengoblin's AWD Project

    Yes it is. You can read his full write up here: https://www.eatonmotorworks.com/blog/dsm/evo-vortex-capsule
  14. greengoblin

    greengoblin's AWD Project

    Thanks ! After rereading my post I said to myself “damn I sound ungrateful”. So regardless an explanation was needed.
  15. greengoblin

    greengoblin's AWD Project

    ThThe fender braces where intended to be done by the end of August early September at most. I took off the whole month of August to do the work only find supply shortage on the tubing Used. It took a whole month to get tubing that normally can be had in two days max. So the braces had to be...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top