The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support STM Tuned
Please Support ExtremePSI

ec17pse's latest activity

  • ec17pse
    ec17pse posted a question on the classified ad Wanted 2g BEP HX35 Bolt on housing.
    https://www.dsmtuners.com/marketplace/new-bullseye-55-bep-housing-and-pm-o2-housing.3849/
  • ec17pse
    Hey everyone, I did not know where best to post this so custom fab section seemed best ( if wrong please feel free to move to the most appropriate area )As you know I'm starting to do more and more billet CNC parts and more will be coming in...
    • ano colors 2.jpg
    • ano colors.jpg
  • ec17pse
    Tim, One of my best friends owns a trailer shop (sales and service), and after I shared your story with him, he took your advice seriously.
  • ec17pse
    Once the rest of the parts as above are checked and if ok then check the ignition module right next to the coilpacks. Make sure all connectors are seated correctly and on the right ones and trial a few units if needed to see if that still happens
  • ec17pse
    ec17pse reacted to steve's post in the thread Bleeding lifters with Like Like.
    If you use diesel fuel they don't stay "pumped up", it doesn't take much pressure to cause them to leak down/collapse unlike motor oil. What it does do is lubricate them and eliminate any air in them. Once the oil starts reaching them it replaces...
  • ec17pse
    ec17pse replied to the thread Bleeding lifters.
    yes i also question many things in life i once thought i knew lolthe idea is you want them to bleed up themselfs again, same as how i read here many years ago while doing the work ( might of been in haynes also but not sure as it was many moons...
  • ec17pse
    to someone could be worth about 150 if the under side is not massively corroded, if its good then could be more
  • ec17pse
    ec17pse replied to the thread 2G Front lower brace bar.
    Its a copy of the tanabe bar which connects to the rear most chassis mounting mounts. It does offer a bit of support as i used one way back in the day. It mostly stops the excess stud slop from shifting about.
  • ec17pse
    Good supporting mods! E316g is possible but hard in stock form. But a 20g would be better, a really good tune with ecmlink for basics unles you wish to go aftermarket ecu and spend more money?Supporting mods will include some basics like...
  • ec17pse
    ec17pse replied to the thread Bleeding lifters.
    On my GSC lifters i did the oil and bled after so they were squishy. They need to pump themselfs up inside bit dont forget the spring inside the GSC is also stiffer then oems so its essentually already pumps up when bled anyway and can support...
  • ec17pse
    ec17pse replied to the thread 420A 2gNT EDM taillights.
    have you gone through this post yet? https://www.dsmtuners.com/threads/correct-2g-edm-taillight-wiring-with-pictures.462588/
  • ec17pse
    ec17pse reacted to fourgsixty3's post in the thread A Journey Incomplete with Like Like.
    Some wood and hammer did the trick. Might need a little more convincing but it looks much better.
  • ec17pse
    Just jumping back in here for this but if i did a redesign for a V2 thats better fitment for the AWD trans clearance and exhaust would this be something people would like? and for those that missed out.I could look into this over some time and...
  • ec17pse
    Wait wait! Is this a rep of a superlite / le man car? From scratch! Thats mega !! You building the chassis to the body once made? And i assume once done will make molds incase you need another panel again when racing and knock it
  • ec17pse
    ec17pse replied to the thread Something OG.
    Interesting they say galv body panels and stainless exhaust system! Because both were never a thing lol i have welded the body and its arc color is normal and not galv color and spitty. If the system was stainless its 409 then as that rots away...
  • ec17pse
    Nice work on these dude! Looks awesomeI look at them and i think window squeegee as the shape reminds me of that LOL.
  • ec17pse
    ec17pse replied to the thread 2G 2G auto trans.
    A shift kit and end clutch kit is not hard but can be time consuming. It can also be troublesome as so many take out a perfectly working car and then have issues later upon reinstalling it so read the instructions on the shift kit a few times!I...
  • ec17pse
    they will poke out and fit yes, as you are ET15 you gain some clearance from the knuckles so depending on your tire size you should be good.i use a ET25 in 18x10.5 on a 295 tire and i have to sand the rear knuckle down about 10mm to give...
  • ec17pse
    I don't know what brand of bearings they supply with this "kit" but it is a very good deal...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Top