The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Kiggly Racing
Please Support Morrison Fabrication

ec17pse's latest activity

  • ec17pse
    ec17pse replied to the thread Tube front end.
    most reg i have read say that the main tube has to be 45mm or your 1 5/8. is bigger. anything outside of this and some support sizes can be 38mm which is 1 1/2" so you will be fine putting 38mm past the main cage. the tie it into the chassis and...
  • ec17pse
    If its only about 5-6mm you can grind the recess back and get away withbthat and no support. Thats exactly what i have and been running for a while now without issues, thats do able for most people.Note to make sure you do not dig in and...
  • ec17pse
    ec17pse reacted to Canadian_CD9A's post in the thread Ask Us Anything! with Like Like.
    You cater to the customer's every whim and build the manifolds around what the customer wants, but you rarely talk about your own favorite setups. What turbo/turbine/manifold/downpipe/wastegate configurations do you think best suit specific...
  • ec17pse
    Update folks.I have several parts now in for the frames. I waited a bit closer to the CNC parts being made before i got ordering on some bits but the list below is what I have.Metal has arrived today ( loads of it )!!!I have all the...
  • ec17pse
    This alone would’ve kept me away from sending him my money.It’s crazy how many shady people there are in the car community.Looks like you’re right OP
  • ec17pse
    I found out that Josh owns NDD, and richard works for Josh! Im not going to mention who told me this but its from a very trusted person!Richard seems to know more about it all and has made some adjustments to try to improve it but by then the...
  • ec17pse
    ec17pse replied to the thread Evo 1 Big 16G vs HTA68 v3.
    You could switch the compressor wheels over on the B16G for an 11blade compressor and assume its still the stock 12 turbine? This would help spool faster as just a turbo alteration.Timing is where you will see the main difference. I forget my...
  • ec17pse
    I thought this was resolved years ago by someone? or was that just a spacer that was resolved to the FWD bracket?
  • ec17pse
    Get a dash cam. Send the video to local law encorcement and DMV and say your worried she is going to kill someone with jumping red lights and have her redo a test! What else can you do but nip it now to save a life later possibly if she is a bad...
  • ec17pse
    I fully understand. stock it is then MR :-(i read about flanges somewhere so can use those or find a slip on and clamp cat setup for ease. then its easier to replace later on if it fails but then it wont be your issue by then anyway but still...
  • ec17pse
    I'm guessing that a typical lower-end used economy car buyer's going to want things to be as close to stock as possible. As it were there are already enough "unscheduled mods" to it, meaning the effects of several accidents that mostly affected...
  • ec17pse
    yeah i guess nowadays people want a non messed with car.for me buying if someone said it was removed to deter car theft i would accept that and give them the cat incase they wish to use it but most likely they will sell it for cash
  • ec17pse
    There's also the issue of resale value. Any new owner might prefer 2 cats and having only one might bring down its price or make it harder to sell, and I'm looking to sell it later this year. If it was a more sporty car then the opposite might be...
  • ec17pse
    not sure on the exact emissions there but it will need to work to a number designated by the state to pass. here we will have a different number but we still have pretty strict system. they base the road tax here on emissions so less emissions...
  • ec17pse
    does your kia have 2 cats like my kia does for modern emission's? if so remove the middle lower cat and drive with the first one thats by the engine bay as they cannot reach those. this is what i have done, mainly because for me i wanted a bit...
  • ec17pse
    ec17pse replied to the thread Cams.
    For a few extra hundred you mght aswel do the springs with cams. Its just peace of mind knowing they able to handle the not profile. You can get some BC cheap enough and even used sets for about 150ish, otherwise a 264 is ideal. 272 can be used...
  • ec17pse
    I dont think I could ever sell mine, i worked too long on it and built alot of it up myself from scratch so the cost is not worth it. i look at these every time and they still make me smile and i love the shape and curves! while i love my modern...
  • ec17pse
    Yes. Just send them an email for your shipping quote and they will take care of it all for you
  • ec17pse
  • ec17pse
    I forgot to reply when I saw the tag come through so sorry for the response time!this is one heck of a resto and so much time being taken to get all the parts back to being fresh and looking sharp once again! very good work and keep it all up...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned VR Speed Factory
Top