99 n/t eclipse gs 420aSo my alternator went bad and I need to replace it. Can anyone give me a step by step "guide" on how to do this. I haven't really looked at it too close but would like something to go off while I'm doing it. I would like to know how to take the belt off and remove and...
I personally have never done anything to the fuel system or tank. When I bought it, it had a new filler neck on it but not sure what else. Where is the fuel pump located? How do I check if my cap is sealing? How do I check the seals or sending unit? Sorry don't know much about fuel systems. Thanks
I just filled my tank and i don't fill it very often. Once I was done pumping I noticed the smell of gas so I looked under the car and there was nothing leaking so I figured since I was at the gas station I was just smelling it. I got in the car and still smelt it but thought nothing. Drove it...
Well I took the belt back just so I know it's not contaminated. I got the next grade up which was a dayco and slapped it on. I noticed some surface rust on the idler pully so i just took some sand paper to it and it came clean. The i Started the car and while it was running adjusted the tension...
The noise is most definitely coming from power steering belt. Im going to say its all tension, I just haven't found the "sweet" spot... Or... The pb blaster contaminated the belt. Everything else checks out fine
So since I messed with the belt almost all day I tried everything and checked everything. One thing I didn't try was to loosen up the belt. I loosened the bolts and started the car and played with the tension. Once I loosened it up some it seemed to stop squeaking. Now every so often I hear a...
No it's the exact same belt because I double checked. I got it now to he point where it doesn't make noise at idle but will start making noise as soon as i hit the gas. Higher the Rpms the louder it seems. Also seems to get louder when it gets hotCould it be the belt is slipping somewhere? How...
Ok do I just use brake cleaner to clean everything off then use the wire brush?Ok so I just took the belt off and all the pullys spin freely. I'm going to clean them up. Can I clean the belt with something to make sure I don't have any fluids on it?
Ok thanks I'm going to go out now and play around with it. I've heard that these cars have a sweet spot for the right tension is that true. How do I know what's too lose and what's too tight?
No I did not clean anything I was spraying some pb blaster on the tensioner bolt and some possibly might have got on it. Would that make it squeal and how do I clean it?
No matter whether the car is cold or at operating temp it still squeals the same. Alright I'll take it back off and see. Is there something I could clean the belt with just in case something got on the belt?
Here's the story sorry if it's not the shortest version but I want to get in all the details that way you guys can help me better. My power steering belt was starting to get worn so I figured I would replace it. There was no noise whatsoever before I took off the belt. I went and bought a cheap...