The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support RTM Racing
Please Support ExtremePSI

Recent content by DevineAstral

  1. DevineAstral

    2G Actual Clutch slipping or from bad slave?

    just wanting to update everyone. have not taken the car apart yet to see if it is the clutch, or a bad rear main seal. but have replaced the slave cylinder because the stock on eventually went out. properly adjusted it and car still acted like it was slipping. the slipping did get worse. have...
  2. DevineAstral

    2G Actual Clutch slipping or from bad slave?

    Unfortunately I have not had a chance to look at the car since getting it towed home but the next chance I get I’ll try this and follow up with everyone on what’s up.
  3. DevineAstral

    2G Actual Clutch slipping or from bad slave?

    I have not attempted to bleed the slave since purchasing the vehicle. It’s possible in its life time that someone else may have attempted it. I unfortunately have not had the chance to look at the car since I got it towed home a few weeks ago.(upon the slave giving out the clutch would not...
  4. DevineAstral

    2G Actual Clutch slipping or from bad slave?

    Thank you for the advice.! I will definitely bring it to his attention because chances are that’s what he is thinking.
  5. DevineAstral

    2G Actual Clutch slipping or from bad slave?

    I was referring to when giving it WOT, whenever the clutch would slip, I would smell burnt fluid. My guess is that it possibly may be oil that everyone else is referring too.
  6. DevineAstral

    2G Actual Clutch slipping or from bad slave?

    I personally have not and as far as I know no one has adjusted anything prior to me purchasing the vehicle.
  7. DevineAstral

    2G Actual Clutch slipping or from bad slave?

    Thanks for the help guys. I guess it’s time to break it open and find out then. Not sure when that will be but I’ll definitely post a follow up comment.
  8. DevineAstral

    2G Actual Clutch slipping or from bad slave?

    Hey all, I’ve tried researching my issues but it either brings more things into question and is just all around confusing so this is for clarification and some help trouble shooting.Afew months ago I noticed my clutch was slipping in the higher gears when I’d try to accelerate.(normal driving...
  9. DevineAstral

    2G Wastegate or BCS issue?

    Thanks for the help folks.! Long story short, I had to change my battery because the old one died and wouldn’t hold charge. While replacing the battery, I was also doing an oil change. While I was under their I figured “why not just unplug the BCS and plug it back in.? Couldn’t hurt anything I...
  10. DevineAstral

    2G Wastegate or BCS issue?

    Okay guys, I’ve exhausted all my research and I’m completely confused as hell now on my issue, where to really start, troubleshoot and how to actually narrow it down to what it is.A few weeks ago I did a pull in my car (because turbo of course.!) and my check engine light came on. Went and got...
  11. DevineAstral

    2g awd part hoarding

    are they auto setup or manual? i've been pondering the idea of converting me spyder over.:p. OEM spec of course.!
  12. DevineAstral

    1997 Eclipse GS-T Spyder

    its been a while since i was on here. BUT GOOD NEWS PEEPS.! THE SPYDER LIVES.! I finished putting the car together and she finally runs! Theres a slight power steering leak somewhere along the passenger side that has developed since last run. BUT NO ISSUES! *knocks on wood*. I've run about 300mi...
  13. DevineAstral

    420A High Idle Issue

    Glad to hear that you got it sorted out! I completely forgot about the EGR being a possibility.:ohdamn:.Probably because the last time i had an issue with mine was in the single digits during winter and the my car kept trying to stall out. I forgot it could work the other way around too. glad...
  14. DevineAstral

    420A High Idle Issue

    in that case, check your vacuum lines, check the gaskets around the throttle body and/or intake. then your idle air control. idle speed sensor. MAP sensor. i'm no gurus like most of the people on here but i'm almost certain that your problem lays within one of those things.
  15. DevineAstral

    420A High Idle Issue

    i recommend troubleshooting before replacing any of the ignition components. It could any number of things. could be idle air control, MAP sensor, possibly the ignition but the engine should run low and and try to stall constantly, not run high. Might also be a vacuum leak or issue somewhere. is...
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top