The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support Morrison Fabrications
Please Support ExtremePSI

Recent content by danielsl1999gsx

  1. danielsl1999gsx

    Kinugawa Turbo, Heard of Them?

    I run their 22psi internal wastegate on my V1 HTA68 and it kicks ass. Holds boost so much better than the stock MHI unit that came with the turbo originally. Almost 6 months with it and no issues whatsoever at 30psi!
  2. danielsl1999gsx

    17x9 +22?

    Amateur hour if you're having trouble fitting a 225 tire on your car. A perfect 2g offset is +38 but I like a little poke so i run +35 on a 17x9 with 255/45/17 with no rubbing at all. ( rear fenders are rolled though :p) Anyways, a +22 will fit however rims will be sticking out quite a bit from...
  3. danielsl1999gsx

    98 GSX Time Trial build

    Ah... Another Helical Oil pump gear and Stubby shaft failure. From my understanding you're supposed to use straight cut oil pump gears with a stubby shaft when you do the balance shaft delete. Had that same failure happen on my spare motor when i opened it up. Here is some similar results to...
  4. danielsl1999gsx

    FP 68HTA dyno results

    Awesome, didnt know we were keeping track!
  5. danielsl1999gsx

    FP 68HTA dyno results

    LOL I guess you're just gonna have to wait for my dyno video to come out on my youtube channel: TheBudetTuner (shameless plug)
  6. danielsl1999gsx

    FP 68HTA dyno results

    Here is my dyno sheet as i promised, we didnt save the 91 octane map so ya'll are just going to have to believe me on that one. Anyways, who care about 91, e85 is where the power happens!
  7. danielsl1999gsx

    FP 68HTA dyno results

    HTA68 v1 UPDATE: I knew this little thing had more in it than what it gave me on my last dyno session. I changed a couple of things along the way because why not, but the main game changer was the wastegate. Swap that thing out asap if you're running the stock MHI unit because it simply cant...
  8. danielsl1999gsx

    2G Lowest key BOV

    Stock Evo 9 or 10 BOV is your best bet. I too live in CA so i know your smog trouble. These bov hold 30psi no with no problem
  9. danielsl1999gsx

    For Sale HKS 264/272, HKS 264/264, TB Elbow, 3" to 2.25. coupler

    Clearing out some space, all prices are shipped but not paypal so add 3.3% or send as a gift. Pm here or shoot me a text at 562-455-5047HKS 264/272 combo, in near prefect condition. Just had them inspected, cleaned, and mircopolished. Ready to drop in and make some power. SOLD HKS 264/264...
  10. danielsl1999gsx

    2G WedsSports TC105N 17x9 +35

    Theres like maybe 5mm of clearance in the rear so with your lower offset I'd say you'll be fine.
  11. danielsl1999gsx

    2G WedsSports TC105N 17x9 +35

    Finally found a set in MINT condition! I've been wanting to try out these wheels on a 2g for quite some time but could never find the right offset since most of these wheels go on Evos. This is a square setup and specs are 17x9 +35 on a 255/40/17 RS3 tire. Rims weigh 16.3lb each and for a...
  12. danielsl1999gsx

    2G Carbonetics AB Hood (Pictures)

    I have a huge box of bolts from past part outs and I used some 10mm bolt/washer combo from an Evo 8 that I had cut up. They fit perfectly and are just the right length.Nope, I'm running the hood as it came from Carbonetics. I do however have heat shields on everything that can have a heat shield.
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top