The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support ExtremePSI
Please Support STM Tuned

Recent content by d_rock10030

  1. Cylinder head is out... what to do before install?

    Sweet, thanks for all the advice guys!
  2. Cylinder head is out... what to do before install?

    Hot tanked, magnafluxed (their equivalent to it) seeing as its impossible on an aluminum head. And decked.I'm using a composite hg, and a buddy of mine is going to do the oil port mod for me, as well as clean up the intake ports.
  3. Cylinder head is out... what to do before install?

    CheckI did the timing belt and tensioner when I did the water pump not even 2,000 miles ago so those are good... Should have stated what has already been done, my bad. What pulleys are you referring to? I will clean the throttle body, and I also plan on cleaning out the i.c. pipping and i.c...
  4. Cylinder head is out... what to do before install?

    Hey guys, My cylinder head is at the machine shop right now, so I was wondering what things I should clean or remove/delete while I have the space to work.... any input/suggestions are welcome, seeing as this is the first head gasket I've done. Thanks in advance.Its a 97gsx by the way.
  5. Obd bluetooth adapter with tablet?

    Nope, anything running an android os should work... I would have to hack the nook color in order to upload an android os so that i can run the torque app on it.
  6. Obd bluetooth adapter with tablet?

    I was thinking of doing a setup like this in my 97 GSX:Nookcolor tablet hacked. Any android phone tablet with bluetooth Torque app ob2 bluetooth adapterMy question is will this setup work for a basic realtime code reader and monitor/gages... will the bluetooth obd adapter work in our...
  7. Car Overheated / Overheating / Overheats [MERGED]

    Just wanted to update everyone on the progress... or lack of. I went and got a cooling system pressure tester today and ill run that tonight after work. (Work 3rd shift) I'm also going to give the shop a call and see if the head work was done right to begin with.Thanks for all the help thus...
  8. Car Overheated / Overheating / Overheats [MERGED]

    If it doesn't, would it be okay to run it without one for a while?I am gping to do a cooling system pressure test tomorrow and see if its holding at 13 psi... thats the correct spec right?!?
  9. Car Overheated / Overheating / Overheats [MERGED]

    All I know is that the thing is getting so hot that it spitts and bubbles out of the overflow and onto my driveway... Im pretty sure the temp sensor is fine because when it gets to that point the gauge is almost pegged at the top... (that happened the day I to it home) havent let that happen...
  10. Car Overheated / Overheating / Overheats [MERGED]

    Well I have stock gauges so im not sure of the exact temp...I know that the head bolts were felpro:ohdamn: and the gasket was DNJ if that helps at all. Not sure how the resurfacing was doneIs this something that I can buy or rent at a Advance Auto or Autozone?There is a strange...
  11. Car Overheated / Overheating / Overheats [MERGED]

    I recently purchased a stock 97 Eclipse GSX with 210,000 miles on her. I purchased it with confidence because it is a single owner with a bible of service records dating back to the second month after it was purchased in 97! I knew it had a problem with it overheating but I can't figure it...
  12. Shift linkage position.

    Alright... Ill give that a shot here today, thanks for the help! I'll update with the progress
  13. Shift linkage position.

    Yeah I had to take the trans off twice because I didnt shim the pivot ball the first time. It is now but it still wont go into reverse... I'll make sure to adjust my clutch pedal/ Master cylinder properly but does it make sense for it to go in every other gear except reverse if the clutch pedal...
  14. Shift linkage position.

    Is there a certain position the transmission linkages need to be in before you connect the cables? For some reason I can't go into reverse at all after my clutch install. I have a 95 eclipse gsx.
  15. 2G ECU coolant temp sensor location?

    Located the coolant temp sensor and of course the wires got pulled apart when I dropped the trans out... soldered then back together and she fired right up! :hellyeah: Thanks again for all the help guys, now I can check this issue off the list :thumb:
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top