The Top DSM Community on the Web

For 1990-1999 Mitsubishi Eclipse, Eagle Talon, Plymouth Laser, and Galant VR-4 Owners. Log in to remove most ads.

Please Support JNZ Tuning
Please Support ExtremePSI

Recent content by codym

  1. codym

    Cold air intake filter collapsing?

    Spectre filters still need to be cleaned like k&n filters. Anytime dust gets caked on the filter, the engine has to work harder. It's like putting your hand over the house vacuum hose. Either way you should get a different filter if yours imploded. Larger in overall diamater and length.I'd...
  2. codym

    strange m/t symptom - transmission cooler ?

    A manual transmission doesn't use any electrical items like solenoids or sensors to tell the transmission when to shift, and they don't use a valve body like an automatic does.The clutch is used on a manual to match the input shaft speed to the output shaft speed, so if you try to slam from...
  3. codym

    1G Intake manifold vacuum lines and connections

    Part Number from Advance Auto is PCV 495
  4. codym

    94 Eclipse

    Suspension stuff finally came in today!! Got the new springs and struts installed. Gives a nice subtle look without dropping it too much, I like it !
  5. codym

    installed new struts/springs and i still hear banging

    Hey fellas I'm having a similar issue. I just installed KYB AGX struts and Eibach sport lines. While installed the rear strut and springs I noticed after I got everything mounted I was able to move the spring aroung slightly with a little force. Unable to figure it out, I assumed once I mounted...
  6. codym

    need help losing my mind

    Sounds like it could possibly be boiling over and just going out the overflow. You'd never see it while you're driving. I personally run ~ 70/30 water to coolant mix and have no overheating problems here in Texas.Things I'd verify is thermostat installed right, no air in the system, and the...
  7. codym

    Tinted Windows suggestion

    Indeed, I wanna see some pictures. 35% in the front should give you more than enough visibility at night through the side views.Here's mine with 5% on the back.
  8. codym

    need help losing my mind

    What mixture of coolant are you using ?
  9. codym

    Tinted Windows suggestion

    OP the feedback you get is gonna be all over the place.I think 20% in the front and 5% in the rear would look good and be perfectly fine to see out of even at night. 5% all around isn't hard to see out of at night through my eyes.Do whatever creams your twinkie snake.
  10. codym

    Tinted Windows suggestion

    I have 5% all around and I can back up from this .... just fine at night.I've also had the back glass painted solid black from the inside on a different car. It had a system that I didn't want anyone seeing.It really is just personal preference, some people don't like any tint at all. I...
  11. codym

    1G TORQUE STEER HELP!!

    This thread caught my attention, I was looking at front axles today for my car at work and 1g awd as well. According to the database and online it's the same part, but if the awd has a half shaft than that's something that needs to be corrected.
  12. codym

    420A Ghost cause of P300 CEL

    Apologies for taking a while to reply. You don't need aftermarket cam gears to verify base timing, nor do you need a fancy digital timing light, an inductive one will work fine, and will probably confuse you less.The process is rather simple, hook up the power wire to the battery, the ground...
  13. codym

    2g Idle - Verify Correct Operation

    Following the correct procedure to set it should be done first before trying to find what's broken. The BISS and ISC may be in perfect working condition, but if they are out of adjustment your going to encounter the same problems.You asked what grounding the timing and diagnostic plug does...
  14. codym

    420A Ghost cause of P300 CEL

    Your ignition timing could be off, it would cause the misfires and high hydrocarbons as well. Get a timing light and set your base ignition timing to 5degrees BTDC.Also verify your plugs were gapped correctly. .044" for N/T's.A worn out cat could explain the high hydrocarbons, but not...
  15. codym

    94 Eclipse

    Up at work checking on the status of my shipment.
Support Vendors who Support the DSM Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Innovation Products Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications MyMitsubishiStore.com RixRacing RockAuto RTM Racing STM Tuned
Back
Top