Ok so you are saying all current license plate holders are magically connected to the car? I believe most holders are screwed on.Anyways food for thought, maybe you can create a mold of you front bumper and make one from the mold to accommodate the plate.
My car did the same thing one day and didn't wanna start up...it was on a highway ramp :| I popped the hood, looked stared for a second, went and turned it on :hmm: I thought it was just that i stalled. A few weeks later I was going fast down my street and I believe I jumped timing. IT didn't my...
Well if it's stock why would the previous owner did some crazy wiring stuff? The first thing to do though is check for power at the speaker. If there is no power at the speaker go to the head unit and check for power there. After that it would be obvious what the problem would be. Either the...
Ohhh ok now that makes sense. So What kind of controller are you using? I would be doing the led conversion on my taillights right after I fix the problem with my motor.
For the 1g it is kinda hard to find some in decent condition. I might just strip the old ones and coat it with a spray on rubber of somesort, still need to look around for what to do with them.
If cylinders 2 and 3 aren't firing then a lot of the members on here will say its the transistor pack.
My broke and same thing happened. I changed the CAS and the coil-pack and nothing happened.
I changed the transistor pack and bam it worked fine. The CAS only goes on one way and it has a...
I have to say nice works. The sequencing is probably the easiest part. The only design flaw for that is that I believe I see you have the turn signals made to turn on all at once...to sequence them I believe you would need to separate the led columns to create the sequential look. Another way I...
I second this. the plasti dip isnt something that would look decent enough to look clean.
The vinyl would be easier and smooth, and easier that body mods.