Hello family, Well, waiting for some more spare parts to arrive to take the car to a workshop.I have a doubt.I ordered the oil pump kit in Rockauto, and there are 3 seals, could someone specify the seals that come?I know that one is an oil pump, another can be counter-rotating and the...

At the moment I have seen a small leak 2 days later in the camshaft seal, but it is a small leak, the large leak has to be lower.Next week a friend comes with tools to lift the engine a little to remove the engine block that it holds, and to be able to remove the studs and disassemble what...

Hello family At the moment a mechanic told me to clean up everything I could with clean brakes to see if the leak was from the camshaft seals.To my disappointment, I have been spraying for 2 hours, cleaning a little from above where I could and testing, starting and stopping the car, the...

This os photo of leakeage...

Hello, I already changed the PCV valve, I put a new gasket for the rocker cover, I put the Nural silicone, and I changed the screws for the rocker cover, and it continues with the oil leakage and I don't know where it can come from.Let's see if you can help me. Thank you

Hellooo, It is the same PCV valve, I asked for it, in rockauto. Now I will try again, otherwise I will have to disassemble everything again. What a grace, I already put the silicone on the gasket and new screws ... But hey, what can we do.

Hello, You will think that I am silly but I have changed the gasket of the lid, I have put silicone for gaskets and let it dry well, And when I go to put the new PCV valve, it does not screw, neither to one side nor to the other, I don't know if it has any trick or what. Let's see if you can...

I'll see if they have a similar one valve in a spare parts store in my area.The strange thing is that the car has been stopped for more than two weeks and continues to stain some oil stain but less.

Hello again, I have disassembled the PCV valve and cleaned it, you can hear the ball inside and only the air passes through one of its tubes, so far so good, but sometimes I blow or move it and the ball locks or is not heard.Could that mean that the valve is starting to fail?Thanks.

Hello, I physically looked at the valve when I disassembled the cylinder head cover and I saw it well, but I suspect that if it were faulty and there was pressure in the engine, the engine pressure warning light would come on or the engine pressure would rise in the frame when the engine is...

Hello, Yes, the gasket that I show in the photo is new and is that damaged after a month and the car has been used very little.The PCV valve is fine, where I have the leak is on the distribution side.Thanks

Hellooo :)The new gasket that you are seeing in the photos is the new one and it is Ajusa brand, so I discard the Ajusa brand of gaskets, I have asked for a new one and Nural silicone will be put on it to give it more tightness.We hope the leak is from there.If not, have as I do to solve...

But I can't change the camshaft seals without going to a workshop, right?And here where I live, the mechanics with these engines are not very careful

Hi guys, I am new to this forum, I wanted to consult a question about an oil leak that I have in the 4G63 engine, I do not know if it is produced by the gasket of the cylinder head cover, by the seal of the camshafts or if it is by the cylinder head gasket.Less than a month ago I changed the...